暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Seagate

Seagate Constellation ES ST500NM0011 500GB 7200RPM 64MB 3.5" SATA internal hard drive

SKU CH-J57Z-NCAPS

500 GB 3.5-inch SATA drive spinning at 7200 RPM with 64 MB cache for desktop storage

  • 500 GB capacity stores large data sets
  • 7200 RPM spindle delivers fast read and write speeds
  • 64 MB cache boosts burst transfer performance
  • PowerChoice technology lowers power and cooling costs
  • Zero-hour condition ensures full factory reliability

Enterprise 500 GB SATA Drive

The Seagate Constellation ES ST500NM0011 is a 3.5-inch internal hard drive built for continuous operation in servers and storage arrays. It delivers 500 GB of capacity at 7200 RPM with a 64 MB cache and a SATA 6 Gbps interface. PowerChoice technology helps lower power and cooling costs during 24x7 use.

Suits RAID and Nearline Storage

This drive suits administrators who need reliable, high-capacity nearline storage for backup, archiving or RAID deployments. Buyers who want more storage capacity or faster solid-state performance should look at alternative solutions.

SATA 6 Gbps Interface Decides Fit

The single specification that decides fit is the SATA 6 Gbps interface. Your system must provide a matching SATA port and 3.5-inch bay; without that connection the drive cannot be installed or used.

特長

  • 500 GB capacity stores large data sets
  • 7200 RPM spindle delivers fast read and write speeds
  • 64 MB cache boosts burst transfer performance
  • PowerChoice technology lowers power and cooling costs
  • Zero-hour condition ensures full factory reliability

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What does the SATA 6Gbps interface cap the drive at in practice?

The SATA 6Gbps interface limits maximum throughput to 6 Gb/s, so sustained reads and writes will not exceed that ceiling.

What physical space and mounting does the 3.5-inch drive need?

It fits a standard 3.5-inch drive bay and uses the usual four side or bottom screw holes for secure mounting.

How is the drive installed and which step is often missed?

Connect a SATA data cable to the motherboard and a SATA power cable from the PSU, then initialise the disk in the operating system — the initialisation step is frequently overlooked.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。