暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Standard 3.5-inch bare hard drive, silver aluminium casing, SATA connectors visible

Seagate

Seagate Exos X 28TB 3.5" SATA 7200 RPM 512MB Cache ST28000NM000C

SKU CH-XRRK-MMS5T MPN ST28000NM000C

High-capacity 28 TB enterprise hard drive with 7200 RPM, 512 MB cache and SATA 6.0 Gb/s interface for hyperscale storage

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity28TB
  • RPM7200 RPM
  • Cache512MB
  • Average Latency4.16ms
  • 28 TB capacity fits massive datasets in a single 3.5" drive
  • 7200 RPM and 512 MB cache accelerate large sequential transfers
  • 5 million-hour MTBF rating supports continuous enterprise workloads
  • Helium side-sealing weld protects against leaks and handling stress
  • SATA 6.0 Gb/s interface integrates with existing NAS and RAID arrays

28 TB Enterprise SATA Hard Drive

The Seagate Exos X 28TB is a 3.5-inch internal hard drive built for enterprise NAS and hyperscale storage. It spins at 7200 RPM with a 512MB cache and uses a SATA 6.0Gb/s interface. The helium-sealed design supports 28TB capacity in a standard form factor.

SATA 6.0Gb/s Interface Limits

The drive connects through a SATA 6.0Gb/s link, so maximum throughput cannot exceed that bus speed. Average latency is 4.16ms at 7200 RPM. Sustained transfer rates will be bounded by the SATA interface rather than the drive media.

Check Bay Space And Power Budget

Verify your chassis has a 3.5-inch bay with at least 26.10mm height, 101.85mm width and 147.00mm length clearance. Ensure the power supply delivers sufficient 12V and 5V current for a 7200 RPM helium drive. Confirm the motherboard or controller provides a SATA 6.0Gb/s port.

特長

  • 28 TB capacity fits massive datasets in a single 3.5" drive
  • 7200 RPM and 512 MB cache accelerate large sequential transfers
  • 5 million-hour MTBF rating supports continuous enterprise workloads
  • Helium side-sealing weld protects against leaks and handling stress
  • SATA 6.0 Gb/s interface integrates with existing NAS and RAID arrays

仕様

BrandSeagate
SeriesExos
ModelST28000NM000C
Part NumberST28000NM000C
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity28TB
RPM7200 RPM
Cache512MB
Average Latency4.16ms
UsageEnterprise NAS Hard Drives
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.85mm
Length (maximum)147.00mm
配送重量0.45 kg
梱包サイズ254 × 178 × 76 mm

この商品に関する質問

Which capacity version of the Seagate Exos X should I choose for a high-density NAS build?

The ST28000NM000C provides 28TB in a single 3.5-inch drive, letting you reach multiple petabytes per rack with fewer bays than lower-capacity models.

What does the 7200 RPM rating mean for daily throughput in a RAID array?

At 7200 RPM with 4.16ms average latency and a 512MB cache, the drive sustains the high sequential speeds needed for large-file workloads such as backup, media ingest, and distributed file systems.

How does the SATA 6.0Gb/s interface limit real-world transfer rates?

The SATA 6.0Gb/s link caps the theoretical maximum at 6.0Gb/s, so sustained reads and writes will top out below that ceiling once protocol overhead and drive mechanics are accounted for.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。