Seagate Exos X16 ST10000NM002G 10TB 7200 RPM 256MB Cache SAS 12Gb/s 3.5" internal hard drive
- SAS 12Gb/s
- 10TB
Seagate
Enterprise 3.5" SAS hard drive delivering 14 TB at 7200 RPM with 256 MB cache for hyperscale storage density
Options 14TB Exos X16
取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。
The Seagate Exos X16 ST14000NM002G is a 14TB 3.5-inch internal hard drive built for enterprise storage arrays. It spins at 7200 RPM with a 256MB cache and connects through a SAS 12Gb/s interface. The helium-sealed design reduces weight and power draw per terabyte while supporting 512e and 4Kn sector formats. A 5-year limited warranty and 2.5M-hour MTBF rating back the drive for continuous operation in rack-mounted systems.
This drive targets cloud data centres and massive scale-out deployments that need maximum capacity per rack slot. The 14TB capacity and SAS interface suit workloads demanding sustained throughput and dual-port redundancy. Buyers who need a SATA interface, a smaller form factor, or a drive rated for desktop workloads should look elsewhere. The 26.11mm height also requires a drive bay that accepts standard 3.5-inch enterprise dimensions.
Installation follows standard 3.5-inch enterprise drive procedures: mount in a hot-swap carrier or fixed bay, attach the SAS data and power connectors, and configure the HBA or RAID controller for 12Gb/s operation. The helium seal is permanent and must not be breached; handle the drive by the edges to protect the side-sealing weld. Firmware should be updated before deployment to ensure compatibility with the storage enclosure’s sensor monitoring.
| Brand | Seagate |
|---|---|
| Series | Exos X16 |
| Model | ST14000NM002G |
| Interface | SAS 12Gb/s |
| Capacity | 14TB |
| NAND Flash Memory Type | Hard Drive |
| RPM | 7200 RPM |
| Cache | 256MB |
| Average Latency | 4.16ms |
| Features | Industry's first 16TB drive for 33% more petabytes per rack* * Compared to 12TB competitive product Highest 16TB hard drive performance with enhanced caching, making it perfect for cloud data center and massive scale-out data center applications Hyperscale SATA model tuned for large data transfers and low latency PowerBalance feature optimizes Watts/TB Helium sealed-drive design delivers lower total cost of ownership through lower power and weight Next-generation helium side-sealing weld technology for added handling robustness and leak protection Digital environmental sensors to mon |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
| Height (maximum) | 26.11mm |
| Width (maximum) | 101.85mm |
| Length (maximum) | 147.00mm |
| 配送重量 | 0.66 kg |
| 梱包サイズ | 169 × 140 × 3 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
A SAS controller or backplane that supports 12Gb/s speeds is needed to utilise the full interface bandwidth of the ST14000NM002G.
Yes, the drive uses the standard 3.5" form factor with maximum dimensions of 147.00mm length, 101.85mm width, and 26.11mm height, matching typical enterprise bays.
Check the drive properties in your RAID controller BIOS or operating system utilities; they will report the 256MB cache size and 7200 RPM rotational speed.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?