暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Seagate

Seagate MBF2300RC 300GB 10000RPM 64MB 2.5 SAS internal hard drive

SKU CH-BYRS-C4XX3

A 300 GB 2.5-inch SAS drive spinning at 10,000 RPM with 64 MB cache for fast server storage

  • 300GB capacity supports data-intensive workloads
  • 10000RPM spindle speed delivers fast data access
  • 6Gb/s SAS interface enables high-throughput connectivity
  • 64MB cache buffers bursts for smoother performance
  • Includes IBM System X caddy for direct 2.5in bay installation

300 GB 10K SAS drive with tray

This new 2.5 inch SAS hard drive delivers 300 GB of storage at 10 000 RPM with a 64 MB buffer. It ships with an IBM System X caddy for direct installation in compatible bays. The 6 Gb/s interface supports enterprise workloads. Zero power-on hours confirm factory-fresh condition.

Server builders needing 2.5 SAS

This drive suits administrators replacing failed disks in IBM System X arrays or expanding capacity in 2.5 inch SAS backplanes. Buyers requiring a different interface protocol, higher capacity, or a 3.5 inch form factor should look at other models. The included tray fits only System X drive bays.

6 Gb/s SAS interface decides fit

The single specification that determines compatibility is the 2.5 inch SAS 6 Gb/s interface. Controllers and backplanes must support this exact signalling rate and physical connector. Verify the host system accepts 6 Gb/s SAS drives before purchase.

特長

  • 300GB capacity supports data-intensive workloads
  • 10000RPM spindle speed delivers fast data access
  • 6Gb/s SAS interface enables high-throughput connectivity
  • 64MB cache buffers bursts for smoother performance
  • Includes IBM System X caddy for direct 2.5in bay installation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What does the 6Gb/s SAS interface limit in real use?

The 6Gb/s SAS interface limits the maximum data transfer rate to the link speed, which is below the mechanical ceiling of the 10000RPM platters.

What physical space and mounting does the 2.5in SAS drive require?

It fits a standard 2.5in drive bay and ships with the IBM System X caddy and tray for direct mounting in compatible servers.

How is the drive installed and what step is often missed?

Mount the drive into the supplied caddy, secure the screws, then slide the assembly into the hot-swap bay until it clicks; forgetting to fully seat the caddy prevents the SAS connector from engaging.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。