暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Seagate Exos 2X14 14 TB 3.5 inch SAS internal hard drive

Seagate

Seagate ST14000NM0001Product Exos 2X14 14 TB 3.5" SAS 12Gb/s internal hard drive

SKU CH-XQ1R-ZQT64 MPN ST14000NM0001Product

14 TB SAS hard drive with 7200 rpm spindle, 256 MB buffer and 12 Gb/s interface for storage arrays

  • NAND Flash Memory TypeSLC
  • 14 TB capacity for massive storage workloads
  • 7200 rpm spindle speed for fast sequential access
  • 256 MB cache to smooth burst I/O
  • 12 Gb/s SAS interface for enterprise throughput
  • Hot-pluggable 3.5" design simplifies drive swaps

Enterprise storage drive

The Seagate Exos 2X14 is a 14 TB internal hard drive built for storage systems and video surveillance workloads. Its SAS interface and 7200 rpm spindle speed suit environments that demand sustained throughput.

SAS connectivity and hot-plug design

The drive uses a 12Gb/s SAS interface and a 3.5 inch form factor with hot-pluggable support. A 256 MB buffer helps smooth burst workloads while the 4Kn disk format aligns with modern enterprise controllers.

Interface and format constraints

The 12Gb/s SAS link sets the peak bus bandwidth for the device. Systems must provide a compatible SAS backplane and controller to reach that rate. The 4Kn sector format requires operating system and RAID controller support for 4 KB native sectors.

特長

  • 14 TB capacity for massive storage workloads
  • 7200 rpm spindle speed for fast sequential access
  • 256 MB cache to smooth burst I/O
  • 12 Gb/s SAS interface for enterprise throughput
  • Hot-pluggable 3.5" design simplifies drive swaps

仕様

BrandSeagate
NAND Flash Memory TypeSLC

この商品に関する質問

What throughput does the 12Gb/s SAS interface actually deliver?

The 12Gb/s SAS link provides up to 12 Gbit/s per port; dual-port operation on the Exos 2X14 allows simultaneous paths for failover or load balancing.

Will the 3.5" 1" high drive fit my server bay and caddy?

The unit measures 4" wide by 5.8" deep by 1" high and weighs 1.51 lb, matching the standard 3.5" form factor used in most hot-plug bays.

How do I install the drive in a hot-plug chassis and what step is often missed?

Slide the drive into the bay until the SAS connector seats firmly; the common mistake is not pushing far enough to engage the hot-plug latch.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。