暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver rectangular 2.5 inch SAS hard drive bare unit

Seagate

Seagate ST1800MM0018 43N12 1.8TB 10000RPM SAS 2.5" internal hard drive

SKU CH-HPJV-4MY76

A 1.8TB 10000RPM SAS drive with 512e Advanced Format for 2.5-inch server bays

  • 8TB capacity stores large datasets
  • 10000RPM spindle delivers fast data access
  • SAS 6Gb/s interface connects to enterprise controllers
  • 512e Advanced Format improves storage efficiency
  • 5-inch small form factor fits dense server bays

Capacity and speed

This is a 1.8TB 2.5-inch SAS hard drive spinning at 10000RPM. It uses a 6Gb/s interface and Advanced Format 512e sectors. The drive is supplied new as a bare unit without brackets or cables. It fits servers and storage arrays that accept 2.5-inch SAS devices.

Server and array builders

The drive suits administrators who need high spindle speed and SAS connectivity in a small form factor. It is not for systems that lack a SAS controller or backplane. Buyers who want more storage capacity or the lower power draw of solid-state media should consider other options.

10000RPM spindle speed

The 10000RPM rotation rate is the key specification that determines whether this drive meets the performance envelope of the target workload. It delivers faster random access than slower nearline drives while remaining a mechanical device. Verify that the host system supports 2.5-inch SAS 6Gb/s drives before purchase.

特長

  • 8TB capacity stores large datasets
  • 10000RPM spindle delivers fast data access
  • SAS 6Gb/s interface connects to enterprise controllers
  • 512e Advanced Format improves storage efficiency
  • 5-inch small form factor fits dense server bays

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does the ST1800MM0018 43N12 need a SAS controller or backplane to operate?

Yes, this drive uses a 2.5" SAS 6Gb/s interface so it must connect to a compatible SAS HBA, RAID card or server backplane.

Can this 10000RPM SAS drive share a backplane with older 3Gb/s SAS disks?

The 6Gb/s link will negotiate down to 3Gb/s when paired with legacy drives on the same backplane.

How do I confirm the 1.8TB Advanced Format drive is recognised at full capacity after install?

Check the OS disk utility or RAID BIOS — it should report the full 1.8TB capacity with 512e sector emulation active.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。