暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch enterprise hard drive with SATA connectors

Seagate

Seagate ST3000NM0005 3TB 7200 RPM 128MB SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-JJH7-ANYCC MPN ST3000NM0005

3TB enterprise SATA drive with 7200 RPM, 128MB cache and CMR technology for 24x7 bulk-data workloads

  • InterfaceSATA 6.0Gb/s
  • Capacity3TB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • Cache128MB
  • Average Latency4.16ms

Options 3TB

  • 3TB capacity stores massive bulk data in a single 3.5" drive
  • 7200 RPM spindle with 4.16ms latency delivers fast data access for enterprise workloads
  • 128MB cache and Advanced Write Caching boost sustained throughput in multi-drive arrays
  • CMR technology ensures consistent performance and maximum density per storage slot
  • Engineered for 24x7 operation with 550TB yearly workload rating and 5-year limited warranty

Built for bulk-data workloads

The Seagate Enterprise Capacity 3.5-inch drive delivers 3TB of storage on a SATA 6.0Gb/s interface. It uses conventional magnetic recording with a 128MB cache and spins at 7200 RPM. Designed for 24x7 operation in multi-drive servers and storage arrays, it targets cloud infrastructures, hyperscale deployments and centralized surveillance systems that need reliable capacity density.

Sustained throughput in dense arrays

The drive is engineered for workloads of 550TB per year, ten times the rating of desktop drives. Advanced Write Caching applies enhanced algorithms to maintain consistent performance across replicated and RAID configurations. Dual processors and ramp-load technology help sustain data access during continuous read and write cycles without the short-term bursts that characterize consumer workloads.

Cool, quiet 24x7 operation

A top-cover-attached motor and humidity sensor contribute to stable thermals in fully populated chassis. The 512n sector format and industry-standard 3.5-inch dimensions (26.10mm height, 101.85mm width, 147.00mm length) allow efficient airflow in dense enclosures. Power efficiency is optimized for always-on environments, supporting reliable operation with minimal acoustic impact.

特長

  • 3TB capacity stores massive bulk data in a single 3.5" drive
  • 7200 RPM spindle with 4.16ms latency delivers fast data access for enterprise workloads
  • 128MB cache and Advanced Write Caching boost sustained throughput in multi-drive arrays
  • CMR technology ensures consistent performance and maximum density per storage slot
  • Engineered for 24x7 operation with 550TB yearly workload rating and 5-year limited warranty

仕様

BrandSeagate
SeriesEnterprise Capacity 3.5
ModelST3000NM0005
InterfaceSATA 6.0Gb/s
Capacity3TB
NAND Flash Memory TypeSLC
RPM7200 RPM
Cache128MB
Average Latency4.16ms
FeaturesCapacity-Optimized Enterprise Hard Drive for Bulk-Data Applications
1TB to 8TB, 3.5-inch enterprise drive with industry-leading CMR technology, for maximum storage per storage slot
Advanced Write Caching feature utilizes enhanced algorithms, resulting in the industry's highest nearline storage workload performance efficiencies
Reliable access to unstructured data in bulk storage applications
12Gb/s SAS and SATA 6Gb/s interfaces in industry-standard formats (512n, 512e and 4Kn) for easy integration into replicated and RAID multi-drive storage servers and systems
State-of-the-art cache
UsageFor Enterprise Storage
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.85mm
Length (maximum)147.00mm
配送重量0.91 kg
梱包サイズ152 × 102 × 25 mm

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power does the 7200 RPM drive draw and how loud is it when running 24x7?

The drive is engineered for continuous 24x7 workloads of 550TB per year with power-efficient operation, dual processors and a humidity sensor for reliable performance in dense multi-drive systems.

Which SATA interface and physical bay does the 3.5-inch drive require?

It uses a SATA 6.0Gb/s interface and fits a standard 3.5-inch bay measuring 147.00mm long, 101.85mm wide and 26.10mm high.

Will the 512n sector format work with my older RAID controller and OS?

The drive uses industry-standard 512n format for easy integration into replicated and RAID multi-drive storage servers and systems alongside existing hardware.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。