暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green PCIe x4 card with two M.2 slots and two SATA ports

Shenzhen Lianrui Information Technology

Shenzhen Lianrui Information Technology LRST9630-2M2S expansion card

SKU CH-EYR7-0KN91 MPN LRST9630-2M2S

Adds two M.2 and two SATA ports at 6.0 Gb/s over PCIe 2.0 x4 with RAID 0, 1, 10 support

  • TypeController Card
  • Adds two M.2 and two SATA ports via PCIe 2.0 x4
  • Marvell 88SE9230 chipset drives four SATA 6Gb/s SSDs
  • Hardware RAID 0, 1, 10 protects or accelerates data
  • Native Command Queuing and MSI reduce latency
  • Hot-plug and partial/slumber power states supported

Four-port SATA RAID controller

This expansion card adds four SATA 6 Gb/s ports to a desktop through a PCIe 2.0 x4 slot using the Marvell 88SE9230 chipset. It provides two M.2 connectors and two standard SATA connectors for up to four SATA SSDs or hard drives. Hardware RAID levels 0, 1 and 10 are supported.

Builders adding SATA drives with hardware RAID

The card suits builders who want to attach multiple SATA SSDs or HDDs and manage them with on-board RAID 0, 1 or 10 without using motherboard ports. It is not for systems that lack a PCIe 2.0 x4 slot or for users who need software-only drive management.

PCIe 2.0 x4 host interface

The controller connects to the host through a PCIe 2.0 x4 link, which determines the maximum aggregate bandwidth available to the four SATA 6 Gb/s ports. A compatible PCIe 2.0 x4 or larger slot is required for installation.

特長

  • Adds two M.2 and two SATA ports via PCIe 2.0 x4
  • Marvell 88SE9230 chipset drives four SATA 6Gb/s SSDs
  • Hardware RAID 0, 1, 10 protects or accelerates data
  • Native Command Queuing and MSI reduce latency
  • Hot-plug and partial/slumber power states supported

仕様

TypeController Card

この商品に関する質問

How do I install the LRST9630-2M2S and what step is often missed?

Insert the card into a PCIe 2.0 x4 slot, attach up to four SATA SSDs to the two M.2 and two SATA connectors, then install the Marvell 88SE9230 driver before creating any RAID array.

What maintenance or replacement will the LRST9630-2M2S need later?

The Marvell 88SE9230 controller requires no scheduled maintenance; only the attached SATA SSDs may need replacement if they wear out or fail.

What limit appears first on the LRST9630-2M2S under sustained use?

The PCIe 2.0 x4 host link caps total throughput, so all four 6.0 Gb/s SATA ports share that single upstream bandwidth.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。