暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connector

Silicon Power

Silicon Power 16GB DDR4 2400MHz CL17 1.2V 288-pin desktop RAM

SKU CH-H28V-SCQME

16 GB DDR4 desktop module at 2400 MHz with CL17 timing and 1.2 V operation

  • 16 GB capacity for smooth multitasking
  • 2400 MHz DDR4 speed for responsive performance
  • CL17 latency with 17-17-17-35 timings for efficient data access
  • 2 V operation reduces power consumption
  • 288-pin unbuffered non-ECC design for standard desktop compatibility

16GB DDR4 2400MHz module

This 16GB DDR4 desktop memory module runs at 2400MHz with PC4-19200 bandwidth. It uses a 288-pin unbuffered design and operates at 1.2V. The kit suits general office work and mainstream desktop builds that require standard JEDEC speeds.

Sustained load behaviour

Under continuous workloads the module maintains its rated 2400MHz frequency and CL17 timings of 17-17-17-35. Non-ECC operation means data integrity relies on the memory controller without hardware correction. The 1.2V supply keeps power draw steady during extended sessions.

Thermals noise and power

The low 1.2V voltage limits heat output during normal desktop use. No active cooling is required for the bare circuit board in typical chassis airflow. Silent operation is assured because the module has no moving parts or fan headers.

特長

  • 16 GB capacity for smooth multitasking
  • 2400 MHz DDR4 speed for responsive performance
  • CL17 latency with 17-17-17-35 timings for efficient data access
  • 2 V operation reduces power consumption
  • 288-pin unbuffered non-ECC design for standard desktop compatibility

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How much heat and power does this 1.2V DDR4 module generate during all-day use?

The module runs at the standard DDR4 voltage of 1.2 V and has no integrated lighting or heat-spreader, so its thermal output stays low enough for normal case airflow to handle continuous operation.

What motherboard slot and memory controller does my system need for this 288-pin DDR4 stick to work?

A desktop motherboard with a 288-pin DDR4 DIMM slot and a memory controller that supports DDR4-2400 (PC4-19200) is required; the module is unbuffered and non-ECC.

If I keep my existing DDR4 modules installed, will this 2400MHz CL17 stick run at its rated speed and timings?

The memory will operate at the highest common speed and loosest timings supported by all installed modules and the motherboard; mixing different speeds or latencies usually forces the whole kit to the slowest common setting.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。