暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Simmtec, Inc

Simmtec, Inc 16GB (2x 8GB) DDR3 1600MHz PC3-12800 CL9 Desktop RAM

SKU CH-MNFC-ZRV8F

16 GB dual-channel DDR3 kit running at 1600 MHz with CL9 latency and 1.5 V operation

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • 16 GB dual-channel kit speeds up multitasking
  • 1600 MHz DDR3 bandwidth feeds data faster
  • CL9 9-9-9-24 timings cut latency delays
  • XMP ready profile applies optimal settings automatically
  • 5 V 240-pin DIMMs fit standard desktop slots

Kit purpose

This 16 GB DDR3 kit contains two 8 GB DIMMs built for desktop systems that use 240-pin memory slots. It targets builders upgrading older Intel or AMD platforms that require 1.5 V unbuffered non-ECC modules. The matched pair enables dual-channel operation on supported motherboards.

Deciding specification

The modules run at 1600 MHz with PC3-12800 bandwidth and 9-9-9-24 timings at the standard 1.5 V. XMP readiness allows the rated speed to be applied automatically on compatible firmware. This speed and latency combination is the single figure that determines whether the kit matches the board’s qualified-vendor list.

Thermals and power

Each stick draws 1.5 V with no additional cooling requirement beyond normal case airflow. The unbuffered non-ECC design keeps power draw low and produces no audible noise in typical desktop workloads. Standard-height construction fits most CPU coolers without clearance issues.

特長

  • 16 GB dual-channel kit speeds up multitasking
  • 1600 MHz DDR3 bandwidth feeds data faster
  • CL9 9-9-9-24 timings cut latency delays
  • XMP ready profile applies optimal settings automatically
  • 5 V 240-pin DIMMs fit standard desktop slots

仕様

Capacity16GB (2 x 8GB)
SpeedDDR3 1600 (PC3 12800)

この商品に関する質問

What does 1600MHz mean for everyday use?

The kit runs at 1600MHz DDR3 with CL9 timing, giving 12800 MB/s peak bandwidth on Intel LGA 1155, 1156, 1366, 2011 and AMD FM1 platforms.

What limits does the DDR3 interface impose?

DDR3 tops out at 1.5V on this kit, so the memory controller and board must support that voltage; speeds above 1600MHz are not guaranteed.

Will the 240-pin DIMMs fit my board?

Each module is a 240-pin unbuffered non-ECC DIMM, so the motherboard needs standard DDR3 desktop slots and physical clearance for two sticks.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。