暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Simmtec, Inc

Simmtec, Inc 16GB DDR4-2133 PC4-17000 2Rx8 1.2V Non-ECC UDIMM SNPV51K2C/16G

SKU CH-GH0Q-C8WJW

16 GB DDR4 UDIMM running at 2133 MHz with 1.2 V operation for desktop upgrades

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • 16 GB DDR4-2133 capacity for smooth multitasking
  • 2 V low voltage reduces power draw and heat
  • 2Rx8 dual-rank layout boosts memory bandwidth
  • Non-ECC UDIMM form factor fits standard desktop slots
  • Equivalent to OEM part SNPV51K2C/16G for drop-in compatibility

16GB DDR4-2133 desktop module

This 16GB DDR4-2133 UDIMM runs at PC4-17000 speed with a 2Rx8 organisation. It is a non-ECC unit built for standard desktop platforms that accept unbuffered memory. The module operates at 1.2V and matches the OEM part number SNPV51K2C/16G for drop-in upgrades.

Thermals and power in daily use

At 1.2V the module draws minimal power and produces little heat under normal desktop workloads. No active cooling is required on the memory itself; standard case airflow is sufficient. The low voltage also keeps system power draw modest during typical office or home use.

Upgrade path and when it matters

This module replaces lower-capacity DDR4 sticks or fills empty slots on boards that support DDR4-2133. The jump is worth it when the system currently runs with less than 16GB total and the workload benefits from extra memory bandwidth. It is not for platforms that require ECC, registered DIMMs or a different DDR generation.

特長

  • 16 GB DDR4-2133 capacity for smooth multitasking
  • 2 V low voltage reduces power draw and heat
  • 2Rx8 dual-rank layout boosts memory bandwidth
  • Non-ECC UDIMM form factor fits standard desktop slots
  • Equivalent to OEM part SNPV51K2C/16G for drop-in compatibility

仕様

Capacity16GB
SpeedDDR4 2133 (PC4 17000)

この商品に関する質問

How is the 16GB DDR4-2133 UDIMM installed and which step is often missed?

Align the notch with the motherboard slot key, press straight down until both retention clips click, then verify the module sits fully seated with no gap at either end.

What maintenance or replacement will this 16GB DDR4 module need later?

No scheduled maintenance is required; the module is rated for continuous operation at 1.2V and should only be replaced if a memory test reports errors.

What limit appears first when the 16GB DDR4-2133 kit runs sustained workloads?

The JEDEC-rated 2133 MT/s data rate and 1.2V operating voltage are the fixed electrical limits; sustained loads cannot exceed them without overclocking.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。