暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green 184-pin DDR266 DIMMs in a matched pair

Simmtec, Inc

Simmtec, Inc 2GB (2 x 1GB) DDR266 PC2100 184-pin desktop RAM

SKU CH-KAJH-AYT6T

A 2GB desktop memory kit of two 1GB DDR266 PC2100 184-pin DIMMs, non-ECC unbuffered at 2.5-2.6V, tested before shipping

  • Capacity2GB (2 x 1GB)
  • 2GB kit expands memory capacity for smoother multitasking
  • 266MHz DDR266 speed matches PC2100 system requirements
  • 184-pin DIMM fits standard desktop memory slots
  • Non-ECC unbuffered design works with typical consumer motherboards
  • Tested modules reduce risk of crashes and errors

Kit composition

This kit contains two 1 GB modules for a total of 2 GB. The modules use the DDR266 standard and fit 184-pin DIMM slots. They operate at 2.5 to 2.6 volts and are rated PC2100. Each module is tested before shipment.

Compatibility profile

The memory suits older desktop systems that accept unbuffered non-ECC DDR modules at this speed. It will not work in boards that require registered or ECC memory. Builders needing higher capacities or faster DDR standards must choose a different kit.

Deciding specification

The 184-pin DDR266 form factor is the single detail that determines whether this kit fits a given motherboard. If the board uses a different pin count or a later DDR generation the modules are incompatible.

特長

  • 2GB kit expands memory capacity for smoother multitasking
  • 266MHz DDR266 speed matches PC2100 system requirements
  • 184-pin DIMM fits standard desktop memory slots
  • Non-ECC unbuffered design works with typical consumer motherboards
  • Tested modules reduce risk of crashes and errors

仕様

Capacity2GB (2 x 1GB)

この商品に関する質問

What must my motherboard already provide for this 184-pin DDR266 kit to function?

A desktop board with 184-pin DDR slots that accepts PC2100 modules at 2.5–2.6 V and runs the memory bus at 266 MHz.

Can I keep my existing PC2100 sticks installed together with this 2 x 1 GB kit?

Yes, provided the board supports the total capacity and all modules share the same 2.5–2.6 V voltage and unbuffered non-ECC design.

How can I verify the kit is running at the correct 266 MHz speed after installation?

Check the memory frequency in the BIOS or a system-information tool; it should report 266 MHz (PC2100) for the new modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。