暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR2 DIMM modules with gold contacts

Simmtec, Inc

Simmtec, Inc 8GB (4 x 2GB) DDR2 DIMM 240 PIN 667MHz PC2 5400/5300 LP DK 790GX-M2RS desktop RAM

SKU CH-MGD9-113A3

8GB DDR2 desktop memory kit with four 2GB DIMMs running at 667MHz PC2-5400/5300 for DFI LANPARTY LP DK 790GX-M2RS

  • Capacity8GB (4 x 2GB)
  • 8GB total capacity across four matched 2GB modules
  • DDR2 667MHz speed rated at PC2 5400 and 5300
  • 240-pin DIMM form factor fits standard desktop slots
  • 100% compatible with DFI LANPARTY LP DK 790GX-M2RS

8GB DDR2 kit for DFI LANPARTY LP DK 790GX-M2RS

This 8GB kit contains four 2GB DDR2 DIMMs that run at 667MHz and are rated for PC2 5400 and PC2 5300 operation. The modules use the standard 240 pin desktop form factor and are verified for full compatibility with the DFI LANPARTY LP DK 790GX-M2RS motherboard. Builders restoring or upgrading that specific board can install the kit without configuration changes.

Upgrade from lower capacity DDR2 on the same

The kit replaces smaller DDR2 sets or mixed speed modules that limit the board to less than 8GB total memory. The jump is worth it when the system needs the maximum supported capacity for period correct workloads or legacy operating systems. Buyers who need higher frequencies, different pin counts or larger single modules cannot use this kit.

特長

  • 8GB total capacity across four matched 2GB modules
  • DDR2 667MHz speed rated at PC2 5400 and 5300
  • 240-pin DIMM form factor fits standard desktop slots
  • 100% compatible with DFI LANPARTY LP DK 790GX-M2RS

仕様

Capacity8GB (4 x 2GB)

この商品に関する質問

Will these 240-pin DDR2 DIMMs fit the DFI LANPARTY LP DK 790GX-M2RS motherboard?

Yes, the kit is specified as 100% compatible with the DFI LANPARTY LP DK 790GX-M2RS and uses the standard 240-pin DDR2 DIMM form factor required by that board.

What is the correct way to install the four 2GB modules, and what step do builders often miss?

Populate all four DDR2 slots with the 2GB sticks, ensuring each module clicks fully into its 240-pin socket; the common mistake is leaving a module slightly unseated, which prevents the system from posting at 667MHz.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。