BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Simmtec, Inc
8GB kit of four 2GB DDR2 DIMMs running at 800MHz with 5-5-5-18 timings and heatspreaders
This kit supplies 8 GB of DDR2 memory in four 2 GB modules running at 800 MHz with PC2-6300/PC2-6400 ratings. It uses 240-pin DIMMs, 5-5-5-18 timings and 1.8 V unbuffered non-ECC operation. The heatspreaders help manage thermals in older chassis. It suits owners of DDR2-era systems who need a full four-slot population.
A matched quad-channel kit removes the instability that mixed speeds or capacities can introduce on DDR2 platforms. The jump is worth it when the board has four free slots and the current memory is slower, untested or causing crashes. Builders keeping a vintage workstation or retro gaming rig running will benefit from the tested, Grade-A modules.
Verify the board accepts DDR2 800 MHz DIMMs at 1.8 V and provides four 240-pin slots for the full 8 GB. Confirm the BIOS can run 5-5-5-18 timings without manual adjustment. Systems limited to lower densities per slot or fewer than four slots cannot use this kit as sold.
| Capacity | 8GB (4 x 2GB) |
|---|
These are standard 240-pin DDR2 DIMMs. The heatspreaders add minimal height, so they fit most desktop boards that accept unbuffered DDR2 memory.
Insert each module at 800MHz rated speed into the motherboard slots until the retaining clips click. The step often missed is seating all four sticks firmly so the 5-5-5-18 timings initialise correctly.
DDR2 memory at 1.8V has no moving parts and rarely fails. Replace only if memory errors appear or a motherboard upgrade requires a different memory type.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?