暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Simmtec, Inc

Simmtec, Inc MemoryMasters 2GB (2 x 1GB) DDR333 desktop RAM

SKU CH-WXZ2-SAJCT

A 2 GB dual-channel DDR333 kit with two 184-pin unbuffered DIMMs rated at 333 MHz PC2700, CL 2.5 and 2.5–2.6 V

  • Capacity2GB (2 x 1GB)
  • 2GB dual-channel kit expands system memory
  • 333MHz DDR333 speed matches PC2700 specification
  • 184-pin DIMM fits standard desktop slots
  • Non-ECC unbuffered design for consumer platforms
  • Every module tested before shipment ensures reliability

2GB DDR333 desktop memory kit

This kit supplies two 1GB unbuffered DIMMs for a total of 2GB. Modules run at 333MHz under the PC2700 standard and are tested before shipment. They use a standard 184-pin layout and operate between 2.5V and 2.6V with CL 2.5 timing.

Non-ECC unbuffered upgrade for older desktops

The memory suits systems that accept non-ECC, non-parity DDR333 DIMMs and need a straightforward capacity increase. Builders who require ECC error correction, registered modules or a different voltage range should look elsewhere.

184-pin DDR333 form factor

Compatibility hinges on the motherboard supporting 184-pin DDR333 DIMMs at PC2700 speed; boards wired for other pin counts or memory standards will not accept these modules.

特長

  • 2GB dual-channel kit expands system memory
  • 333MHz DDR333 speed matches PC2700 specification
  • 184-pin DIMM fits standard desktop slots
  • Non-ECC unbuffered design for consumer platforms
  • Every module tested before shipment ensures reliability

仕様

Capacity2GB (2 x 1GB)

この商品に関する質問

How much heat or noise does the 333 MHz DDR333 kit add when the PC runs all day?

The modules are passive components with no fan, so they add no audible noise; heat output is low and handled by normal case airflow.

What must my motherboard provide for these 184-pin sticks to work?

A desktop board with DDR slots that accept 184-pin DIMMs running at 2.5–2.6 V and supporting PC2700 speeds.

Will the CL 2.5 timing of this kit cause issues if I keep slower memory installed?

The system will run all modules at the slowest speed and loosest latency present, so the kit simply matches the older memory timing.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。