暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connectors

SK hynix

SK hynix 4GB DDR3 1333MHz ECC Registered DIMM

SKU CH-E6C6-ED7VW

A 4 GB DDR3 ECC registered DIMM running at 1333 MHz for server or workstation systems

  • ECC-registered design protects data integrity in critical workloads
  • 1333 MHz DDR3 speed delivers reliable throughput for everyday tasks
  • 4 GB capacity per module expands system memory headroom
  • 240-pin DIMM form factor fits standard desktop slots
  • 5 V operating voltage matches DDR3 platform requirements

4GB DDR3 1333MHz ECC Registered DIMM

This SK hynix module is a single 4GB DDR3 stick running at 1333MHz with PC3-10600 speed. It uses a 240-pin DIMM form factor and operates at 1.5v. The memory features ECC-Registered error correction and a 2Rx4 rank configuration for data integrity in compatible systems.

Suits servers and workstations requiring

This module fits systems that specifically support registered DDR3 DIMMs with ECC. It is not for standard desktop motherboards that accept only unbuffered non-ECC memory. Buyers needing unbuffered modules or different DDR3 speeds should verify their platform requirements before purchase.

ECC-Registered specification determines

The registered buffer and ECC functionality are the critical specifications that decide whether this part works in a given system. Only platforms designed for registered DDR3 memory can use this module; it will not function in slots wired for unbuffered memory.

特長

  • ECC-registered design protects data integrity in critical workloads
  • 1333 MHz DDR3 speed delivers reliable throughput for everyday tasks
  • 4 GB capacity per module expands system memory headroom
  • 240-pin DIMM form factor fits standard desktop slots
  • 5 V operating voltage matches DDR3 platform requirements

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What motherboard slot and chipset are required for this 240-pin DDR3 ECC Registered DIMM?

The module fits a standard 240-pin DDR3 DIMM socket and needs a chipset that supports registered ECC memory; most consumer desktop boards do not enable ECC, so verify the motherboard manual before purchase.

Will this 1333 MHz registered module run in a system that currently uses unbuffered 1333 MHz DDR3?

No, registered and unbuffered DIMMs cannot be mixed; the memory controller must support registered operation, so all installed sticks must be registered ECC.

How can I confirm the stick is detected at 1333 MHz with ECC active after installation?

Enter the BIOS or UEFI and check the memory information screen; it should show 4 GB at 1333 MHz (PC3-10600) with ECC enabled, and the OS should report the same speed and ECC status.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。