暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR4 DIMM with black chips and gold contacts

SK hynix

SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM

SKU CH-9637-H95YD

A 16 GB DDR4 server module with ECC, registered signal processing and dual-rank organisation running at 2133 MHz CL15

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • ECC protection prevents data corruption in critical workloads
  • Registered signal processing improves stability on multi-module server boards
  • Dual-rank organisation increases memory density per channel
  • 16 GB capacity supports larger datasets and virtual machines
  • 2133 MHz DDR4 speed delivers 17000 MB/s bandwidth

16GB DDR4-2133 ECC Registered Module

This 16GB DDR4 SDRAM module runs at 2133MHz with CL15 latency and 1.2V operation. It uses a 288-pin DIMM form factor and is built for server platforms that require registered, error-correcting memory.

Thermals Noise and Power

Standard JEDEC 1.2V voltage keeps power draw low for dense server configurations. Registered buffering reduces electrical load on the memory controller, helping maintain signal integrity under sustained workloads.

Upgrade Scope and Fit

Replaces non-ECC or unbuffered DIMMs in systems that mandate registered ECC memory with dual-rank x4 organisation. The jump is worth it when your platform requires data-integrity checking and registered signalling for stability.

特長

  • ECC protection prevents data corruption in critical workloads
  • Registered signal processing improves stability on multi-module server boards
  • Dual-rank organisation increases memory density per channel
  • 16 GB capacity supports larger datasets and virtual machines
  • 2133 MHz DDR4 speed delivers 17000 MB/s bandwidth

仕様

Capacity16GB
Type288-Pin DDR4 SDRAM

この商品に関する質問

How do I install this 288-Pin DDR4 DIMM and which notch alignment mistake should I avoid?

Align the single off-centre key notch on the 288-Pin DDR4 module with the slot ridge, press straight down until both side clips click, and ensure the registered ECC module is seated in a server board that supports registered memory.

What maintenance or replacement will this 16GB dual-rank ECC module need over its service life?

No scheduled maintenance is required; if a correctable error count rises or an uncorrectable error appears, replace the module — otherwise it runs for the server’s lifetime.

What thermal or voltage limit appears first when this 1.2V CL15 kit runs at 2133MHz under sustained load?

The JEDEC 1.2 V operating voltage is the first fixed limit; sustained heavy workloads keep the module at this voltage while the registered buffer manages signal integrity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。