暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR3 memory module with gold edge connectors and black DRAM chips

SK hynix

SK hynix HMT112U7TFR8A-H9 1 GB DDR3 desktop RAM

SKU CH-S3XE-YDM3V

Single 1 GB DDR3 ECC desktop memory module running at 1333 MHz with PC3-10600 speed

  • 1 GB capacity for basic desktop tasks
  • DDR3 SDRAM technology for compatible systems
  • 1333 MHz bus speed for standard data rates
  • ECC 1Rx8 configuration for error correction
  • PC3L-10600E rating for low-voltage operation

1 GB DDR3 ECC module

This 1 GB DDR3 ECC desktop memory module is designed for systems that require error-correcting code support. It suits maintenance of legacy workstations or servers where registered ECC DDR3 is mandatory. Builders needing higher densities or non-ECC memory should look elsewhere.

Installation and platform fit

The module uses the standard DDR3 DIMM form factor and operates at PC3-10600 (DDR3-1333) speeds. It requires a motherboard with DDR3 slots that explicitly support unbuffered ECC memory. Systems limited to non-ECC or registered DIMMs will not accept this stick.

Capacity and headroom

A single 1 GB module provides minimal capacity for modern workloads and will fill quickly with multitasking or current operating systems. It is adequate for basic diagnostics, lightweight legacy applications or expanding an existing matched set. Upgrading beyond a few gigabytes will require multiple modules and compatible slot count.

特長

  • 1 GB capacity for basic desktop tasks
  • DDR3 SDRAM technology for compatible systems
  • 1333 MHz bus speed for standard data rates
  • ECC 1Rx8 configuration for error correction
  • PC3L-10600E rating for low-voltage operation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the 1333 MT/s DDR3 bus speed become the bottleneck before the CPU does under sustained load?

The module runs at 1333 MT/s, so its bandwidth ceiling is fixed at that rate; if the processor can issue requests faster, the memory bus will limit throughput first.

Does the ECC DDR3 module run hotter or draw more power than non-ECC sticks during all-day operation?

ECC adds a parity chip, so power draw and heat rise slightly, but the DDR3-1333 voltage and timing remain the dominant factors for thermal output.

Must my motherboard specifically support unbuffered ECC DDR3 for this 1Rx8 stick to work?

Yes — the module is unbuffered ECC 1Rx8 DDR3, so the board chipset and BIOS must explicitly enable ECC on unbuffered slots; standard non-ECC desktop boards will not recognise it.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。