暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Metal 3.5-inch hot-swap drive tray with 2.5-inch adapter bracket, silver finish, LED indicator lights visible

SMUGDESK

SMUGDESK 3.5" Hot-Swap Tray with 2.5" Adapter for PowerEdge R440 R540 R640 R740 R940 C6420

SKU CH-X0QX-BPWTC

A 3.5-inch hot-swap tray with 2.5-inch adapter for PowerEdge 14th-gen servers, supporting SAS and SATA drives with LED status indicators

  • Hybrid tray kit fits both 2.5 and 3.5 SAS SATA drives
  • Native hot-swap with LED status and fault lights for server monitoring
  • Metal construction ensures stable pin contact under heavy server workloads
  • Tool-free assembly speeds storage expansion and RAID rebuild tasks
  • Exact fit for PowerEdge R440 R540 R640 R740 R940 C6420 14th-gen 3.5 bays

Hybrid 3.5" server drive kit

This hybrid kit combines a full-size 3.5-inch hot-swap drive tray with a 2.5-inch to 3.5-inch adapter bracket. It is built for PowerEdge R440, R540, R640, R740, R940 and C6420 servers equipped with 3.5-inch hot-swap bays. The tray accepts standard 3.5-inch SAS or SATA drives directly, while the adapter lets you mount 2.5-inch SAS or SATA SSDs and HDDs in the same bay.

Sustained server workload stability

Metal construction and precision-aligned contact pins maintain stable high-speed data transmission during long-duration heavy-duty server operation. Native hot-swap support with LED status indicators shows drive activity and fault warnings for quick troubleshooting without full server shutdown under proper procedures. The sturdy housing resists vibration inside rackmount cabinets, preventing poor-contact read-write errors during RAID rebuilds and continuous storage tasks.

Upgrade from single-form-factor bays

This kit replaces the need for separate trays when you want to mix 2.5-inch and 3.5-inch SAS or SATA drives in 14th-generation PowerEdge 3.5-inch hot-swap slots. It is not for servers lacking 3.5-inch hot-swap bays or for drives using interfaces other than SAS or SATA. The jump is worth it when expanding storage capacity or rebuilding arrays with mixed drive form factors.

特長

  • Hybrid tray kit fits both 2.5 and 3.5 SAS SATA drives
  • Native hot-swap with LED status and fault lights for server monitoring
  • Metal construction ensures stable pin contact under heavy server workloads
  • Tool-free assembly speeds storage expansion and RAID rebuild tasks
  • Exact fit for PowerEdge R440 R540 R640 R740 R940 C6420 14th-gen 3.5 bays

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does the metal tray add noticeable heat or noise when used continuously in a PowerEdge R640?

The tray is a passive metal caddy with no moving parts, so it does not generate its own heat or noise; drive thermals and acoustics are unchanged from mounting the drive directly in the bay.

What drive sizes and interfaces must I already have to use the included 2.5-to-3.5 adapter?

You need a 2.5-inch SAS or SATA SSD or HDD; the adapter brackets it into the 3.5-inch tray so it fits the server bay and connects to the backplane.

Will the status LEDs work with older 3.5-inch SAS drives I keep from a previous server?

Yes, the tray’s LED pins align with the server backplane, so drive-activity and fault LEDs function with any compatible 3.5-inch SAS or SATA drive installed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。