暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

SMUGDESK

SMUGDESK USB 3.0 to SATA Adapter 22Pin ASM1053e 2.5 Inch

SKU CH-Z166-KBTAE

Connects a 2.5-inch SATA HDD or SSD to a USB 3.0 port at up to 6Gbps with the ASM1053e chip

  • ASM1053e chip ensures stable, compatible data transmission
  • SATA III standard supports up to 6Gbps transfer speeds
  • 22Pin connector fits all 2.5-inch SATA HDD and SSD drives
  • Plug and play via USB 3.0 port with no driver installation needed
  • USB 3.0 interface backward compatible with USB 2.0 and USB 1.1

USB 3.0 to SATA 22-Pin Adapter

This adapter connects a 2.5-inch SATA HDD or SSD to a computer through a USB 3.0 port. It uses an ASM1053e control chip for stable signal transmission and supports SATA III speeds up to 6Gbps. The plug-and-play design requires no driver installation for immediate use.

Suitable for users accessing 2.5-inch SATA drives

Ideal for technicians, data-recovery tasks, or anyone migrating files from a laptop drive to a desktop. Not suited for 3.5-inch drives, M.2 modules, or setups that need internal SATA cabling. The single 22-pin connector only accepts standard 2.5-inch SATA devices.

22-pin SATA connector for 2.5-inch drives

The built-in 22-pin interface combines data and power in one plug, matching every 2.5-inch SATA HDD or SSD on the market. This connector type is the deciding specification — drives with a different pin layout cannot attach.

特長

  • ASM1053e chip ensures stable, compatible data transmission
  • SATA III standard supports up to 6Gbps transfer speeds
  • 22Pin connector fits all 2.5-inch SATA HDD and SSD drives
  • Plug and play via USB 3.0 port with no driver installation needed
  • USB 3.0 interface backward compatible with USB 2.0 and USB 1.1

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What type of drive and connector does this adapter require?

It fits any 2.5-inch SATA HDD or SSD that uses the standard 22Pin SATA power-and-data connector.

Will the adapter work if I plug it into an older USB 2.0 port on my laptop?

Yes, the USB 3.0 interface is backward compatible with USB 2.0 and USB 1.1 ports, though transfer speeds will be limited to the older port's maximum.

How can I confirm the ASM1053e chip is delivering the full 6Gbps SATA III link after I connect a drive?

Check the negotiated link speed in your operating system's device manager or disk utility; it should show a 6Gbps SATA III connection when a compatible drive is attached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。