暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular E1.L 9.5mm enterprise SSD with silver metal housing and edge connector

Solidigm

Solidigm D5-P5316 30.72TB E1.L 9.5mm PCIe 4.0 enterprise SSD SSDPFWNV307TZOZ

SKU CH-BZK6-GN2ZH MPN SSDPFWNV307TZOZ

30.72TB E1.L 9.5mm PCIe 4.0 enterprise SSD delivers 7000 MBps read and 3600 MBps write with 800000 IOPS random read

  • Form FactorE1.L 9.5mm
  • Capacity30.72TB
  • Memory Components144L QLC 3D NAND
  • InterfacePCI-Express 4.0
  • Max Sequential ReadUp to 7000 MBps
  • Max Sequential WriteUp to 3600 MBps

Option 30.72TB E1.L Opal

  • 72TB capacity stores massive datasets in a single E1.L 9.5mm module
  • PCIe 4.0 interface delivers up to 7000 MBps sequential read throughput
  • 800000 IOPS random read performance accelerates latency-sensitive workloads
  • 144L QLC 3D NAND enables 22.93PBW random endurance for write-intensive use
  • 2000000-hour MTBF and Opal security ensure reliable protected operation

Capacity and density

The Solidigm D5-P5316 delivers 30.72TB in a single E1.L 9.5mm module using 144L QLC 3D NAND. It targets data-centre workloads that prioritise capacity per rack unit over write endurance. Sequential reads reach 7000 MBps while writes peak at 3600 MBps. Random read performance hits 800000 IOPS at 4K blocks.

Endurance envelope

The drive sustains 104.55PBW for 64K sequential writes and 22.93PBW for 64K random writes. Heavy mixed or write-centric workloads will consume the write budget faster than read-intensive analytics. Power draw ranges from 5W idle to 25W active. MTBF is rated at 2000000 hours.

Build integration

The E1.L 9.5mm form factor fits dense server chassis designed for PCIe 4.0 x4 signalling. Opal security is supported without extra software. Operating temperature spans 0°C to 70°C with 1000G shock and 2.17 GRMS vibration tolerance. Systems lacking E1.L bays or PCIe 4.0 backplanes cannot use this drive.

特長

  • 72TB capacity stores massive datasets in a single E1.L 9.5mm module
  • PCIe 4.0 interface delivers up to 7000 MBps sequential read throughput
  • 800000 IOPS random read performance accelerates latency-sensitive workloads
  • 144L QLC 3D NAND enables 22.93PBW random endurance for write-intensive use
  • 2000000-hour MTBF and Opal security ensure reliable protected operation

仕様

BrandSolidigm
ModelD5-P5316
Part NumberSSDPFWNV307TZOZ
Form FactorE1.L 9.5mm
Capacity30.72TB
Memory Components144L QLC 3D NAND
InterfacePCI-Express 4.0
Max Sequential ReadUp to 7000 MBps
Max Sequential WriteUp to 3600 MBps
4KB Random Read800000 IOPS (4K Blocks)
4KB Random Write510 MB/s (64K Blocks)
Endurance22.93PBW(64K Random), 104.55PBW(64K Sequential)
MTBF2,000,000 hours
SecurityOpal
Power Consumption (Idle)5W
Power Consumption (Active)25W
Operating Temperature0°C ~ +70°C
Max Shock Resistance1000G (0.5ms)
Max Vibration ResistanceOperating: 2.17 GRMS
Non-Operating: 3.13 GRMS
配送重量0.17 kg
梱包サイズ140 × 110 × 17 mm

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the E1.L 9.5mm form factor fit in my existing PCIe 4.0 server backplane?

The drive uses the E1.L 9.5mm form factor with a PCIe 4.0 x4 interface, so it requires a compatible E1.L slot and backplane that supports PCIe 4.0 signalling.

How can I verify the drive is delivering the rated 800000 IOPS random read performance after installation?

Run a 4K block random read benchmark such as FIO; sustained results near 800000 IOPS confirm the 144L QLC NAND and controller are operating as specified.

Does the single pack include a heatsink, mounting bracket or power cable for the 25W active power draw?

The generic OPAL single pack contains only the SSD itself; any E1.L heatsink, retention hardware or cabling must be sourced separately for your chassis.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。