暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver rectangular 2.5-inch SATA SSD with label showing 1.92TB capacity

Solidigm

Solidigm SSDSC2KG019TZ1Z D3-S4620 1.92TB SATA 2.5-inch internal SSD

SKU CH-D2FS-F2P38 MPN SSDSC2KG019TZ1Z

A 1.92TB SATA 2.5-inch internal SSD delivering up to 14.16 GB/s read and 8.01 GB/s write speeds with 91000 random read IOPS

  • 92 TB capacity stores large datasets and media libraries
  • SATA interface fits standard 2.5-inch drive bays in servers and workstations
  • Sequential read up to 14.16 GB/s speeds up bulk data loading
  • Sequential write up to 8.01 GB/s accelerates backup and archiving tasks
  • 91,000 random read IOPS and 53,000 random write IOPS handle mixed enterprise workloads

Capacity and purpose

The Solidigm D3-S4620 is a 1.92TB SATA solid state drive built for read-intensive server and storage workloads. Its 2.5-inch form factor fits standard drive bays in rackmount and tower chassis.

SATA interface limits

The SATA connection caps sequential throughput at 14.16 GB/s read and 8.01 GB/s write. Random performance reaches 91000 IOPS read and 53000 IOPS write, which suits mixed read-heavy workloads but cannot match PCIe-based drives.

Pre-installation checks

Verify that your system provides a free SATA data port and matching power connector for a 2.5-inch drive. Confirm the operating system or RAID controller supports the full 1.92TB capacity without additional drivers.

特長

  • 92 TB capacity stores large datasets and media libraries
  • SATA interface fits standard 2.5-inch drive bays in servers and workstations
  • Sequential read up to 14.16 GB/s speeds up bulk data loading
  • Sequential write up to 8.01 GB/s accelerates backup and archiving tasks
  • 91,000 random read IOPS and 53,000 random write IOPS handle mixed enterprise workloads

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Should I pick the 1.92TB D3-S4620 or a different capacity for a read-heavy server workload?

The 1.92TB D3-S4620 is rated for 91000 random read IOPS and 14.16 GB/s sequential read, making it well suited for read-intensive workloads.

What does the 14.16 GB/s maximum read transfer rate mean once the drive is installed in a server?

That figure is the peak sequential throughput over the SATA interface; real-world sustained reads will be lower and depend on the controller, queue depth and workload mix.

The drive uses a SATA interface — what does that cap in practice?

SATA limits the drive to 6 Gb/s link speed, so the 14.16 GB/s and 8.01 GB/s peaks are burst figures that the bus cannot sustain continuously.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。