暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Red open bracket adapter board with mSATA slot and SATA connector

STARTECH

STARTECH SAT32MSAT257 mSATA to 2.5in SATA ssd accessory

SKU CH-27WN-S415K MPN SAT32MSAT257

Converts an mSATA SSD into a 7mm high 2.5in SATA 6Gbps open bracket drive

  • ColorRed
  • Conversion TraymSATA Drive to 2.5" Drive
  • Compatible Products2.5"
  • SpecificationsDrive Installation: Fixed Drive Type: mSATA (Mini SATA) Inte
  • FeaturesConvert an mSATA SSD into a 7mm high 2.5in SATA 6Gbps Open B
  • Converts mSATA SSD to 2.5in SATA 6Gbps drive
  • 7mm open bracket fits standard 2.5in bays
  • 52 pin mSATA receptacle connects directly
  • SATA 7+15 pin combo powers and transfers data
  • Open frame design maximises heat dissipation

mSATA to 2.5in SATA adapter

This adapter converts an mSATA solid-state drive into a 7 mm high 2.5in SATA 6Gbps open bracket drive. It fits a single mSATA module using a 52 pin receptacle and presents a standard SATA data and power connector to the host. The open frame design allows maximum heat dissipation during operation.

Replaces direct mSATA slot dependency

The adapter upgrades a system that only accepts 2.5in SATA drives so it can use an existing mSATA SSD instead. The jump is worth it when a laptop or desktop has a vacant 2.5in bay but no mSATA connector on the motherboard. It also lets builders repurpose an mSATA drive from an older ultrabook without buying a new 2.5in SSD.

Fits any 2.5in SATA drive bay

Installation is fixed and the bracket matches the 7 mm height used in slim laptops and standard drive caddies. The converter needs only the SATA data and power cables already present in the target machine. It frees up the mSATA slot on the original board for other expansion cards or leaves it empty if the board is being retired.

特長

  • Converts mSATA SSD to 2.5in SATA 6Gbps drive
  • 7mm open bracket fits standard 2.5in bays
  • 52 pin mSATA receptacle connects directly
  • SATA 7+15 pin combo powers and transfers data
  • Open frame design maximises heat dissipation

仕様

BrandStarTech.com
ModelSAT32MSAT257
ColorRed
Conversion TraymSATA Drive to 2.5" Drive
Compatible Products2.5"
SpecificationsDrive Installation: Fixed
Drive Type: mSATA (Mini SATA)
Interface : SATA
Number of Drives: 1
Drive Connectors: 1 - mSATA (52 pin; Mini SATA) Receptacle
Host Connectors: 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Maximum Data: Transfer Rate 6 Gbps
Type and Rate: SATA III (6 Gbps)
FeaturesConvert an mSATA SSD into a 7mm high 2.5in SATA 6Gbps Open Bracket SSD
Compatible with mSATA solid state drives such as the SAMSUNG 840 EVO MZ-MTE250BW
mSATA 250GB SATA III TLC Internal Solid State Drive (SSD) / mSATA to 2.5 7mm SATA Adapter / Mini PCIe mSATA to SATA Adapter / mSATA to SATA 7mm Enclosure / mini PCIe SSD Adapter / mSATA to sata 3 Adapter
Maximum heat dissipation with open frame design
Add an mSATA SSD to any 2.5in SATA platter application to increase performance
配送重量0.11 kg
梱包サイズ183 × 147 × 36 mm

この商品に関する質問

What height does the adapter add to my mSATA drive for a 2.5in bay?

The open bracket holds the mSATA SSD at a 7mm profile so it fits standard 2.5in SATA drive slots.

Which connectors do I line up when seating the mSATA card?

Insert the 52 pin mSATA edge connector into the receptacle on the red PCB, then plug the combined 7+15 pin SATA data and power connector into the host.

Does the open frame need any thermal pad or paste over time?

No, the frame relies on passive airflow; just keep dust off the exposed PCB and drive controller.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。