暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black centrifugal blower fan 97 by 33 mm three-pin 12 V

SunnyStar Co., Ltd

SunnyStar Co., Ltd A34123-57 97*33mm 12V 0.46A 3-Pin Centrifugal Blower Case Fan

SKU CH-MNAT-XYXVM

A 100 mm centrifugal blower with a 12 V 0.46 A motor and 3-pin connector for targeted case cooling

  • TypeCase Fan
  • Fan Size100mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • NIDEC centrifugal blower delivers focused airflow
  • 12 V 0.46 A draw keeps power use low
  • 3-pin connector fits standard motherboard headers
  • Ball bearing ensures long running life
  • 97 × 97 × 33 mm frame suits tight cases

Compact Centrifugal Blower

The SunnyStar A34123-57 is a 12 V, 0.46 A centrifugal blower built for tight enclosures. Its 97 × 97 × 33 mm housing fits 100 mm mounting points while the blower wheel directs airflow across heatsinks or through restricted ducts. A three-pin connector provides simple voltage control. Ball-bearing construction supports continuous operation in industrial or custom PC builds.

Suited for directed airflow in small chassis

This blower suits builders who need focused exhaust from a 33 mm deep slot, such as small-form-factor cases, GPU shrouds or rack appliances. The fixed three-pin header works with basic voltage regulation but offers no PWM signal for automatic speed curves. Buyers who require four-pin speed control or a slimmer profile should consider other designs.

33 mm frame depth

The 33 mm thickness is the critical dimension that determines whether the A34123-57 fits your bracket or duct. Measure the available clearance before ordering, as the blower cannot be installed in spaces sized for thinner fans. The 97 mm square footprint aligns with standard 100 mm screw holes.

特長

  • NIDEC centrifugal blower delivers focused airflow
  • 12 V 0.46 A draw keeps power use low
  • 3-pin connector fits standard motherboard headers
  • Ball bearing ensures long running life
  • 97 × 97 × 33 mm frame suits tight cases

仕様

SeriesA34123-57
ModelA34123-57
TypeCase Fan
Fan Size100mm
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Blower
Dimensions97*97*33mm

この商品に関する質問

What comes with the SunnyStar A34123-57 blower fan and is anything else needed?

The fan ships as a single 97*97*33 mm centrifugal blower with a 3-pin power connector. No screws, adapters or controllers are included, so you will need mounting hardware and a 3-pin header on your board or a separate fan controller.

Which version of the A34123-57 should I choose for my build?

Only one version is listed: 12 V, 0.46 A, 3-wire 3-pin, 100 mm frame, ball bearing, non-LED black housing. Choose this model when you need a 10 cm centrifugal blower with those exact electrical and physical specs.

What does the 0.46 A rating mean once the fan is installed?

At 12 V the blower draws 0.46 A, giving a modest power draw that most motherboard 3-pin headers or standard fan controllers can supply without extra cabling.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。