暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80mm square CPU fan, 25mm thick, two-wire connector

SunnyStar Co., Ltd

SunnyStar Co., Ltd MW-825H12S 80mm 12V 0.24A 2 Pin CPU cooler

SKU CH-HBXS-J4J2W

Compact 80 mm sleeve-bearing fan delivers 12 V cooling with a two-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing Typesleeve bearing
  • Power Connector2 Pin
  • LEDNo
  • 80 mm diameter fits compact CPU air-cooler builds
  • 12 V 0.24 A rating keeps power draw low
  • Sleeve bearing reduces mechanical noise during operation
  • Two-pin connector enables simple motherboard or controller hookup
  • Black 80×25 mm frame suits standard 80 mm mounting points

SunnyStar 80 mm 12 V Sleeve-Bearing Fan

This 80 mm square fan measures 25 mm thick and runs on 12 V at 0.24 A through a two-pin connector. The sleeve bearing keeps the rotor spinning with minimal friction. No LED lighting is fitted, so the unit stays visually neutral inside any chassis.

For compact builds that need a slim 80 mm airflow

The low-profile frame suits small-form-factor cases, rackmount servers or replacement cooling on legacy heatsinks where space is tight. Builders who require PWM speed control, ball-bearing longevity or higher static pressure should look at other models.

Two-pin 12 V power connector

The fixed-voltage two-wire interface means the fan runs at constant speed whenever the header is powered. Motherboards or fan controllers that only supply four-pin PWM headers cannot regulate this unit, so verify the header type before purchase.

特長

  • 80 mm diameter fits compact CPU air-cooler builds
  • 12 V 0.24 A rating keeps power draw low
  • Sleeve bearing reduces mechanical noise during operation
  • Two-pin connector enables simple motherboard or controller hookup
  • Black 80×25 mm frame suits standard 80 mm mounting points

仕様

ModelMW-825H12S
ColorBlack
TypeFan only
Fan Size80mm
Bearing Typesleeve bearing
Power Connector2 Pin
LEDNo

この商品に関する質問

How much noise and heat will the 80 mm sleeve-bearing fan add when running continuously?

The sleeve bearing and 0.24 A draw at 12 V keep acoustic output low, so the fan adds minimal background noise and negligible heat inside the case during all-day operation.

What power header must my motherboard or controller provide for the 2-pin connector?

A standard 12 V two-pin fan header supplies the 0.24 A the cooler needs; no extra adapters or controllers are required.

Will the 80×25 mm frame align with the mounting holes on my existing cooler bracket?

The 80 mm square, 25 mm thick frame matches the common 80 mm fan mounting pattern used on many legacy brackets.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。