Supermicro
Supermicro 32GB DDR4-2133 2Rx4 ECC REG server RAM
32 GB DDR4-2133 ECC registered server memory module with 2Rx4 organisation
- Capacity32GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 32 GB capacity for high-density server workloads
- DDR4-2133 speed rated at PC4-17000 bandwidth
- ECC registered design protects data integrity
- 2Rx4 dual-rank organisation optimises memory throughput
- 20 V low-voltage operation reduces power draw
32GB DDR4-2133 ECC Registered DIMM
This 32GB DDR4 module operates at 2133 MT/s with a PC4 17000 rating. It uses a 288-pin form factor and runs at 1.20V. The registered design and ECC support target server and workstation platforms that require error correction and signal buffering.
Capacity and headroom
A single 32GB stick provides substantial memory capacity for virtualisation hosts or database workloads. The dual-rank 2Rx4 organisation allows higher density per channel. Systems limited to DDR4 2133 speeds will not benefit from the module's 2400 MT/s capability.
Registered ECC requirement
The module is registered and ECC-enabled, so it only functions in platforms that support both registered signalling and error-correcting code. Desktop consumer boards that accept only unbuffered non-ECC memory cannot use this DIMM.
特長
- 32 GB capacity for high-density server workloads
- DDR4-2133 speed rated at PC4-17000 bandwidth
- ECC registered design protects data integrity
- 2Rx4 dual-rank organisation optimises memory throughput
- 20 V low-voltage operation reduces power draw
仕様
| Brand | SuperMicro |
|---|---|
| Model | M393A4K40CB1-CRC |
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
この商品に関する質問
Will this 288-pin DDR4-2133 2Rx4 registered ECC module run alongside my existing DDR4-2133 registered ECC DIMMs?
Yes, it uses the same 288-pin DDR4 interface, 1.20 V voltage, registered buffer and ECC, so it will operate with other DDR4-2133 registered ECC modules at the common speed.
How can I verify the module is running at DDR4-2133 with ECC active after installation?
Check the BIOS memory information or use a tool such as dmidecode; it should report 32 GB, 2133 MT/s, 2Rx4 organisation, registered type and ECC enabled.
Does the package include only the 32 GB DIMM or are any extra parts supplied?
The box contains the single 32 GB 288-pin DDR4-2133 2Rx4 registered ECC DIMM; no additional cables, brackets or cooling accessories are included.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。



