暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Redundant server PSU, silver metal enclosure, 2.99 by 1.57 by 14.17 inches, 2.2 lbs

Supermicro

Supermicro server power supply

SKU CH-8CMT-6AJ1Q

Redundant 740 W server power supply in a 2.99" x 1.57" x 14.17" form factor weighing 2.2 lbs

  • Maximum Power740W
  • Output[email protected] , 5V Standby@4A
  • Dimensions2.99" x 1.57" x 14.17"
  • Weight2.2 lbs.
  • 740 W redundant output keeps servers running during a module failure
  • 2 lb lightweight design eases installation in dense racks
  • Compact 2.99 x 1.57 x 14.17 in form factor fits 1U chassis
  • Single-output architecture simplifies cable routing and maintenance
  • 740 W capacity supports high-density compute workloads

Supermicro 740W Redundant Server Supply

This 740 watt redundant power supply from Supermicro fits 1U and 2U server chassis that use the common redundant form factor. It provides a single high-current output plus a 5 volt standby rail for baseboard management. The unit is new and rated for continuous operation in rack environments.

Suited for single-socket rack builds.

System integrators populating redundant bays in Supermicro or compatible OEM chassis will find the correct connector keying and airflow direction here. Builders using standard desktop ATX cases cannot mount this supply because the physical layout and connector pinout differ from consumer designs. Buyers who need a non-redundant desktop unit should look elsewhere.

740W maximum power rating

The 740 watt maximum power rating is the primary figure for sizing the supply against the server's total load. With a single main output and 5 volt standby at 4 amps, the unit covers typical single-processor configurations with multiple drives and add-in cards. Dimensions of 2.99 by 1.57 by 14.17 inches and a weight of 2.2 lbs confirm the slim redundant footprint.

特長

  • 740 W redundant output keeps servers running during a module failure
  • 2 lb lightweight design eases installation in dense racks
  • Compact 2.99 x 1.57 x 14.17 in form factor fits 1U chassis
  • Single-output architecture simplifies cable routing and maintenance
  • 740 W capacity supports high-density compute workloads

仕様

BrandSuperMicro
ModelPWS-741P-1R
Maximum Power740W
Output[email protected] , 5V Standby@4A
Dimensions2.99" x 1.57" x 14.17"
Weight2.2 lbs.

この商品に関する質問

Will the 2.99" x 1.57" x 14.17" housing fit a standard 1U redundant power supply bay?

The 2.99" x 1.57" x 14.17" form factor matches the industry-standard 1U redundant PSU footprint, so it slides into any compatible hot-swap cage.

What is the correct way to seat the PWS-741P-1R so the 740W unit powers on, and what step do installers often miss?

Push the module firmly until the latch clicks into the chassis connector; the common error is stopping when resistance is first felt instead of completing the full insertion.

When should the internal cooling fan be cleaned or the whole 2.2 lb supply replaced to maintain 740W output?

Vacuum the fan intake every six to twelve months; replace the unit if the fan becomes noisy, airflow drops, or the supply fails to maintain 740W under load.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。