暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

SXDOOL

SXDOOL FD124020MB-H 4020 12V 0.12A 4CM double ball CPU cooler

SKU CH-YW69-HR0TC

A 40 × 40 × 20 mm copper-and-aluminium heatsink with a 12 V, 0.12 A double-ball-bearing fan for CPU cooling

  • Compact 40 × 40 × 20 mm footprint fits tight builds
  • Copper and aluminium heatsink draws heat from the CPU
  • Double-ball bearing fan runs at 12 V and 0.12 A for quiet operation
  • Three-wire connector enables speed monitoring and control
  • Light 0.8 kg package keeps overall system weight low

Compact 40 mm Copper-Aluminium Cooler

The SXDOOL FD124020MB-H is a 40 mm square CPU air cooler that combines a copper base with aluminium fins and a double-ball-bearing fan. It draws 0.12 A at 12 V through a three-wire connection and is built for small-form-factor systems where height clearance is below 20 mm.

Replacing Stock Low-Profile Coolers

This unit steps up from basic OEM coolers that use sleeve bearings or thinner fin stacks, offering longer bearing life and better heat spread from the copper base. The upgrade makes sense when the existing cooler cannot keep temperatures stable under sustained load in a 1U or mini-ITX chassis.

Straightforward Three-Wire Mount

Installation uses the standard three-wire header and the supplied mounting hardware, so no adapter cables are required. The most common issue is interference with tall memory modules or VRM heatsinks that sit close to the socket, so verify clearance before fitting.

特長

  • Compact 40 × 40 × 20 mm footprint fits tight builds
  • Copper and aluminium heatsink draws heat from the CPU
  • Double-ball bearing fan runs at 12 V and 0.12 A for quiet operation
  • Three-wire connector enables speed monitoring and control
  • Light 0.8 kg package keeps overall system weight low

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What are the exact dimensions of the 4020 cooler so I can check clearance in my case?

The unit measures 40 by 40 by 20 mm, matching the standard 4020 form factor.

How do I connect the three-wire lead to the motherboard header?

Align the keyed three-pin connector with the CPU fan header and press straight down; the missing pin prevents reverse insertion.

When should I consider replacing the double ball bearing fan?

Replace it if the 12 V 0.12 A motor becomes noisy, vibrates, or no longer spins at full speed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。