暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver metal drive bay adapter with open front slot and rear connector for Dell PowerEdge R730

Synnex

Synnex EDGE 3.5" SAS Drive Bay Adapter for PowerEdge R730

SKU CH-E1JQ-HPT1R

A 3.5" SAS drive bay adapter adding one internal expansion slot for Dell PowerEdge R730 and PowerVault MD1400 or MD3400 servers

  • TypeConsumer Electronics
  • Adds a 3.5" drive slot to PowerEdge R730 servers
  • Supports both Serial ATA and SAS drives in one bay
  • Fits PowerEdge R730xd and PowerVault MD1400 or MD3400
  • Internal form factor keeps cabling inside the chassis
  • Backed by a three-year limited warranty

EDGE 3.5" Drive Bay Adapter

The EDGE drive bay adapter adds a single internal 3.5" expansion bay to compatible Dell servers. It supports both Serial ATA and SAS drive interfaces. The unit is supplied new with a three-year limited warranty.

Compatibility and Limitations

This adapter fits Dell PowerEdge R730, PowerEdge R730xd, PowerVault MD1400 and PowerVault MD3400 systems. Builders needing additional bays beyond the single slot provided should consider other solutions. It does not support 2.5" drives or external enclosures.

Single 3.5" Bay Capacity

The adapter provides exactly one 3.5" bay, so storage expansion is limited to a single drive. Verify that your server chassis has an available internal 3.5" slot before purchase.

特長

  • Adds a 3.5" drive slot to PowerEdge R730 servers
  • Supports both Serial ATA and SAS drives in one bay
  • Fits PowerEdge R730xd and PowerVault MD1400 or MD3400
  • Internal form factor keeps cabling inside the chassis
  • Backed by a three-year limited warranty

仕様

BrandEDGE
TypeConsumer Electronics

この商品に関する質問

Will this adapter let me keep using my 3.5" SAS drives in a PowerEdge R730?

Yes, it provides one internal 3.5" bay that accepts Serial ATA or SAS drives and is listed as compatible with the PowerEdge R730 and R730xd.

How can I confirm the drive is recognised after I install the adapter?

The drive should appear in the system BIOS or RAID controller interface during POST and be visible in the operating system disk management once the server boots.

Does the package include mounting screws or a drive tray, or must I order them separately?

The adapter is the bay insert itself; any screws, caddies or trays required to secure the drive inside the bay are not included and must be sourced separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。