暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone SATA duplicator with seven hot-swap slots and LCD screen

Systor

Systor 1:7 SATA Duplicator & Sanitizer 36GB/min 600MB/sec 128MB (SYS607DP)

SKU CH-74HF-VNETH

Copies and sanitises up to seven SATA drives at once with 128 MB buffer and 600 MB/s speed

  • TypeHard Drive Duplicator
  • Target1 to 7
  • Buffer Memory128 MB
  • Data Transfer Rate36.0GB/min (600MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 07

DATA TRANSFER RATE 36.0GB/min [600MB/sec]

  • Copies up to seven drives at once with 1:7 target ratio
  • 600 MB/sec transfer rate moves 36 GB per minute
  • Standalone operation needs no computer or software
  • DoD 5220.22-M compliant sanitisation erases data securely
  • Accepts 2.5" and 3.5" SATA drives without adapters

Standalone SATA Duplicator & Sanitizer

This Systor unit copies one source SATA drive to up to seven targets without a host computer. It handles both 2.5 and 3.5 solid-state and mechanical drives natively. An LCD screen guides operation and shows progress. The 128 MB buffer sustains a 36 GB per minute transfer rate. Power input accepts 115 or 230 V at 50 or 60 Hz with a 300 W supply.

Upgrades From Software-Based Cloning

Manual PC-based cloning ties up a workstation and copies one drive at a time. This hardware duplicator removes that bottleneck and adds DoD 5220.22-M compliant sanitisation. The jump is worth it when you need simultaneous multi-target duplication or certified data erasure on a regular basis. Standalone operation also avoids driver or OS compatibility issues.

Check Drive Interface And Bay Count

Verify every source and target drive uses a native SATA connector; other interfaces are not supported. Confirm you need up to seven targets, as the chassis provides exactly seven slots. Ensure the operating environment can supply 115 or 230 V mains power. The unit operates independently, so no host system, software licence or specific OS version is required.

特長

  • Copies up to seven drives at once with 1:7 target ratio
  • 600 MB/sec transfer rate moves 36 GB per minute
  • Standalone operation needs no computer or software
  • DoD 5220.22-M compliant sanitisation erases data securely
  • Accepts 2.5" and 3.5" SATA drives without adapters

仕様

BrandSystor
TypeHard Drive Duplicator
Target1 to 7
Buffer Memory128 MB
Data Transfer Rate36.0GB/min (600MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 300 W
Package Contentssee pictures for details

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What drive sizes fit the bays without adapters?

The duplicator accepts 2.5 and 3.5 SATA drives directly in the slot-load bays.

How do you start a copy or erase job on the standalone unit?

Insert the source drive in the first bay, add up to seven target drives, select System-and-Files or Whole-Media mode on the LCD, then press Start.

Which parts will need replacement after extended use?

The 40 mm rear fans and the per-bay outtake fans are the only moving parts that wear out over time.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。