暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board M.2 2280 SSD with black controller and silver label

Team Group

Team Group MP33 M.2 2280 2TB PCIe 3.0 x4 NVMe 1.3 Internal SSD TM8FP6002T0C101

SKU CH-Z3CV-0MZFQ MPN TM8FP6002T0C101

M.2 2280 NVMe 1.3 SSD with 2TB of 3D NAND storage delivering up to 1800 MBps read and 1500 MBps write speeds for desktops and notebooks

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity2TB
  • Memory Components3D NAND
  • InterfacePCIe 3.0 x4 with NVMe 1.3

Options 2TB MP33

  • Up to 1800 MB/s sequential read for rapid data access
  • Up to 1500 MB/s sequential write for quick file saves
  • 220,000 IOPS random read for snappy multitasking
  • 480 TBW endurance rating for long-term reliability
  • M.2 2280 form factor fits desktops and notebooks

2 TB PCIe 3.0 x4 NVMe 1.3 drive

The Team Group MP33 is an M.2 2280 internal SSD built with 3D NAND flash and a PCIe 3.0 x4 interface that supports NVMe 1.3. It targets desktop and notebook users who want a straightforward capacity upgrade from SATA storage. The drive delivers sequential reads up to 1800 MBps and writes up to 1500 MBps for everyday workloads.

Operating range 0 °C to 70 °C

Rated for an operating temperature span of 0 °C to 70 °C, the SSD runs without active cooling in typical laptop or desktop chassis. With no DRAM cache and a PCIe 3.0 x4 link, power draw stays modest during sustained transfers. The controller manages thermals through firmware throttling rather than a heatsink, keeping acoustic output at zero.

480 TBW endurance and SLC caching

A 480 TBW rating and 1 500 000 hour MTBF reflect the durability of the 3D NAND array. The M.2 2280 single-sided layout fits standard motherboard slots and most ultrabook bays without clearance issues. On-board SLC caching accelerates burst writes, while NVMe 1.3 features such as autonomous power-state transitions help maintain consistent responsiveness over the drive’s lifespan.

特長

  • Up to 1800 MB/s sequential read for rapid data access
  • Up to 1500 MB/s sequential write for quick file saves
  • 220,000 IOPS random read for snappy multitasking
  • 480 TBW endurance rating for long-term reliability
  • M.2 2280 form factor fits desktops and notebooks

仕様

BrandTeam Group
SeriesMP33
ModelTM8FP6002T0C101
Part NumberTM8FP6002T0C101
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity2TB
Memory Components3D NAND
InterfacePCIe 3.0 x4 with NVMe 1.3
ProtocolNVMe 1.3
Cache0MB
Max Sequential ReadUp to 1800 MBps
Max Sequential WriteUp to 1500 MBps
4KB Random ReadUp to 220,000 IOPS
4KB Random WriteUp to 200,000 IOPS
Terabytes Written (TBW)480TB
MTBF1,500,000 hours
FeaturesUsing new generation of 3D flash memory: Capacity, performance, and durability are greatly improved
PCI-e interface - Supports latest NVMe 1.3 protocol
M.2 2280 specification: Supports the next-generation platforms of Intel and AMD. Suitable for both desktop and notebook
Supports SLC Caching technology. Greatly enhance computing performance
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Operating HumidityRH 90% under 40 celsius degree
Max Shock Resistance1,500G / 0.5 ms
Max Vibration Resistance80-2,000 Hz / 20G
Height3.80mm
Width22.00mm
Depth80.00mm
Weight6.00g
配送重量0.01 kg
梱包サイズ123 × 90 × 5 mm

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the M.2 2280 SSD and what step do people often miss?

Insert the drive at an angle into the M.2 slot, then secure it with the motherboard screw; the step often missed is checking BIOS to confirm NVMe 1.3 detection and setting it as the boot drive if cloning the OS.

What maintenance or replacement will the 2TB drive need later?

The drive has no moving parts and 480TB TBW endurance; no routine maintenance is required, but monitor SMART health attributes and replace the unit if media wear or reallocated sector counts rise toward the rated limit.

What limit appears first during sustained heavy writes on this PCIe 3.0 x4 SSD?

The SLC cache fills after prolonged large-file writes, causing sequential speeds to drop from the 1500 MBps peak toward native 3D NAND rates; thermal throttling may also engage if the drive reaches 70°C.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。