Team Group T-FORCE VULCAN Z 2.5" 512GB SATA III internal SSD T253TZ512G0C101
- Internal Solid Stat…
- Consumer
Team Group
A 2.5 inch SATA III solid-state drive with 256GB of 3D NAND storage delivering up to 520 MBps read and 450 MBps write speeds for faster game loads
The Team Group T-FORCE VULCAN Z is a 2.5-inch internal solid-state drive with 256GB capacity and a SATA III interface. It uses 3D NAND flash and operates without a DRAM cache, relying on host memory buffer support. The drive targets consumers who want a straightforward upgrade from a mechanical hard drive for gaming and everyday workloads.
A smart SLC caching algorithm boosts burst write speeds to deliver smoother cutscenes and level loading. S.M.A.R.T. monitoring and Windows TRIM support keep the drive running efficiently over time, while built-in ECC and wear-levelling protect stored data from corruption.
Sequential reads reach up to 520 MBps and writes up to 450 MBps, enough for game installs, OS boots and general file transfers. The 80 terabytes written rating and one million hour MTBF provide headroom for typical consumer use, though sustained heavy write workloads will exhaust the endurance budget sooner.
| Brand | Team Group |
|---|---|
| Series | T-FORCE VULCAN Z |
| Model | T253TZ256G0C101 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 256GB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Cache | No DRAM (HMB) |
| Max Sequential Read | Up to 520 MBps |
| Max Sequential Write | Up to 450 MBps |
| Terabytes Written (TBW) | 80TB |
| MTBF | 1,000,000 hours |
| Features | 3D NAND best upgrade option for gaming Enhanced performance for seamless cutscenes Smart optimization to ensure reliable performance Shock-resistant, vibration-resistant, and reduced noise interference |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1500G/0.5ms |
| Max Vibration Resistance | 20G (non-operating) |
| Height | 7.00mm |
| Width | 69.90mm |
| Depth | 100.00mm |
| Weight | 45.00g |
| 配送重量 | 0.05 kg |
| 梱包サイズ | 148 × 93 × 11 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The 80TB TBW rating is the write-endurance limit; the 1,000,000-hour MTBF is a statistical reliability figure. Whichever threshold is reached first will determine when a replacement is needed, depending on your actual daily write volume.
The sequential write speed caps at 450 MBps, so the SATA III 6Gb/s interface and controller firmware will be the bottleneck before the 3D NAND or thermal limits are reached under continuous load.
It has no moving parts, so acoustic noise is effectively zero; operating temperature range is 0°C to 70°C and it runs on DC +5V, drawing only the low power typical of a DRAM-less SATA SSD.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?