暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Team Group

Team Group TED21G667C5-S01 1 GB DDR2-667 laptop RAM

SKU CH-SJZ8-4C84J MPN TED21G667C5-S01

1 GB DDR2-667 SO-DIMM module rated at 667 MHz with CL5 latency and 5.4 GB/s bandwidth

  • 1 GB DDR2 SO-DIMM for compatible laptops
  • 667 MHz PC2-5400 speed delivers 5.4 GB/s bandwidth
  • CL5 latency at 1.8 V for stable operation
  • 200-pin unbuffered non-ECC module fits standard DDR2 slots
  • 6-layer PCB with 128Mx8 BGA chips per side

1 GB DDR2-667 SO-DIMM for older laptops

This single 1 GB module runs at 667 MHz with CL5 latency and 1.8 V voltage. It uses a 200-pin DDR2 SO-DIMM form factor and delivers 5.4 GB/s bandwidth on a six-layer PCB. The double-sided design places four BGA chips per side in a 128Mx8 configuration. It arrives in retail packaging with a lifetime manufacturer warranty.

Non-ECC unbuffered laptop upgrade

The module is non-ECC and unbuffered, matching the requirements of most mainstream DDR2-era notebooks. Buyers whose systems demand ECC or registered memory should look elsewhere. It is also unsuitable for desktops or any platform that cannot accept a 200-pin SO-DIMM.

200-pin DDR2 SO-DIMM form factor

Compatibility hinges on the 200-pin DDR2 SO-DIMM interface; only laptops with a matching DDR2 slot can use this module. The 1 GB capacity and PC2-5400 speed rating are secondary to the physical and electrical interface. Verify the slot type before purchasing.

特長

  • 1 GB DDR2 SO-DIMM for compatible laptops
  • 667 MHz PC2-5400 speed delivers 5.4 GB/s bandwidth
  • CL5 latency at 1.8 V for stable operation
  • 200-pin unbuffered non-ECC module fits standard DDR2 slots
  • 6-layer PCB with 128Mx8 BGA chips per side

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How much power does the 1.8 V DDR2 module draw when running all day?

The stick is rated for 1.8 V operation; actual draw depends on the laptop's memory controller and workload.

What must the laptop provide for this 200-pin SO-DIMM to work?

A free DDR2 SO-DIMM slot that accepts 200-pin unbuffered non-ECC modules at 1.8 V.

Will this CL5 667 MHz module run stably in a system that only supports slower DDR2 speeds?

The module follows the DDR2 standard and will negotiate the highest common speed with the memory controller.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。