暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Grey thermal putty in a 100 g tub with two plastic spatulas

Thermal Grizzly

Thermal Grizzly TG Putty Pro 100 g thermal putty

SKU CH-9DWV-DAYNH

Electrically non-conductive thermal putty replaces GPU thermal pads and fills 0.2 to 3.0 mm gaps with excellent conductivity

  • Specifications100 grams
  • FeaturesThermal Grizzly Putty is an electrically non-conductive alte

Version Pro

  • Electrically non-conductive formula protects sensitive GPU components
  • Flexible putty replaces rigid thermal pads for better contact
  • Included spatulas enable precise application on complex PCB layouts
  • Compensates height differences from .2 mm to 3.0 mm
  • 100 g container covers large cards like RTX 4090 VRM and VRAM areas

Electrically non-conductive thermal putty

Thermal Grizzly TG Putty Pro is a high-performance, electrically non-conductive thermal putty supplied in a 100 gram container. It serves as a flexible alternative to traditional thermal pads for GPU modifications and cooler replacements. The material is designed for safe application directly on sensitive PCB components and voltage regulators. Enthusiasts and repair technicians can apply it using the included spatulas or by hand.

Sustained load behaviour

The putty accommodates height differences from 0.2 mm to 3.0 mm, maintaining consistent contact between the die and cooler under prolonged thermal cycling. Its excellent thermal conductivity rating ensures efficient heat transfer during extended gaming or compute sessions. The non-curing compound remains pliable, preventing pump-out or dry-out that can degrade performance over time. This stability supports reliable operation when the graphics card runs at full load for hours.

Thermals noise and power

As a passive thermal interface material, the putty adds no noise, vibration or power draw to the system. It replaces factory thermal pads on memory modules and VRMs, improving heat flow to the heatsink without requiring active cooling changes. Lower component temperatures can allow the GPU fans to spin more slowly under the same load. The electrically non-conductive formula eliminates short-circuit risk if excess material contacts nearby surface-mount components.

特長

  • Electrically non-conductive formula protects sensitive GPU components
  • Flexible putty replaces rigid thermal pads for better contact
  • Included spatulas enable precise application on complex PCB layouts
  • Compensates height differences from .2 mm to 3.0 mm
  • 100 g container covers large cards like RTX 4090 VRM and VRAM areas

仕様

BrandThermal Grizzly
ModelTG-P-P-100-R
Part NumberTG-P-P-100-R
Specifications100 grams
FeaturesThermal Grizzly Putty is an electrically non-conductive alternative to traditional thermal pads, specifically designed for GPU modifications and the replacement of thermal pads between the PCB and the cooler.

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the putty dry out or pump out after the GPU runs hot all day?

The electrically non-conductive putty remains pliable and does not dry out, maintaining contact across 0.2 mm to 3.0 mm gaps during continuous operation.

What tools or parts do I need before opening the 100 g container?

Two spatulas are included; you only need isopropyl alcohol and lint-free wipes to clean the old pads off the PCB and cooler.

Will one 100 g tub cover the VRAM and VRM on my RTX 4090 front and back?

A 30 g tub typically covers the front VRAM and VRM on an RTX 4090; the 100 g container provides enough putty for both sides with margin.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。