暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Ten black 240-pin DDR3 desktop memory modules in a kit

Timetec

Timetec 80GB Kit 10x8GB DDR3L/DDR3 1600MHz CL11 1.35V/1.5V 240-Pin Desktop RAM

SKU CH-6TFD-12S8V

Ten 8 GB DDR3L/DDR3 1600 MHz CL11 dual-voltage modules deliver 80 GB total capacity for desktop multitasking

  • SpeedDDR3 1600 (PC3 12800)
  • ColorBlack PCB
  • 80 GB total capacity across 10 modules for heavy multitasking
  • Dual-voltage 1.35 V or 1.5 V operation fits DDR3L and DDR3 systems
  • 1600 MHz DDR3 speed with CL11 latency for responsive desktop performance
  • 240-pin UDIMM non-ECC unbuffered design installs in standard desktop slots
  • JEDEC-standard 2Rx8 dual-rank 512x8 ICs tested for stability

Capacity and fit

This Timetec kit supplies 80 GB of desktop memory across ten 8 GB modules. It uses 240-pin DDR3L/DDR3 UDIMM sticks that run at 1600 MHz with CL11 latency. The dual-voltage design operates at 1.35 V or 1.5 V, so it fits both DDR3L and standard DDR3 slots on Intel and AMD platforms.

Thermals noise and power

Each module draws either 1.35 V or 1.5 V depending on the motherboard setting, keeping power draw low for DDR3. The unbuffered non-ECC design has no active cooling, so the kit adds no fan noise to the system. Standard JEDEC voltage ensures stable operation without extra heat in typical desktop workloads.

Upgrade path

The kit replaces smaller DDR3 kits or mixed-capacity sets to reach 80 GB in a single matched package. The jump is worth it when a workstation needs maximum multitasking headroom for virtual machines, large datasets or heavy creative suites. Buyers who need ECC error correction or laptop SO-DIMM form factors should look elsewhere.

特長

  • 80 GB total capacity across 10 modules for heavy multitasking
  • Dual-voltage 1.35 V or 1.5 V operation fits DDR3L and DDR3 systems
  • 1600 MHz DDR3 speed with CL11 latency for responsive desktop performance
  • 240-pin UDIMM non-ECC unbuffered design installs in standard desktop slots
  • JEDEC-standard 2Rx8 dual-rank 512x8 ICs tested for stability

仕様

SpeedDDR3 1600 (PC3 12800)
ColorBlack PCB

この商品に関する質問

How do I install the ten 8GB DDR3L/DDR3 modules and which step is most often missed?

Power off the desktop, open the case, and align each 240-pin UDIMM with the motherboard slots; the step most often missed is verifying the BIOS detects all 80GB at 1600MHz CL11 after the first boot.

What maintenance or replacement will the 10x8GB DDR3 kit need over time?

No scheduled maintenance is required; if a module fails, the lifetime warranty covers replacement of the defective 8GB stick.

What limit appears first when the 80GB DDR3 kit runs sustained workloads at 1600MHz?

The CL11 latency at 1.35V or 1.5V is the first bottleneck under continuous heavy use.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。