暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Timetec

Timetec Pinnacle Konduit 16GB DDR4 3200MHz White desktop RAM

SKU CH-8EQ2-4F6Q8

A white 16 GB DDR4 module running at 3200 MHz with CL16 latency, 1.35 V operation and XMP 2.0 support for one-click overclocking on AMD and Intel platforms

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ColorWhite
  • 16 GB capacity for demanding workloads
  • DDR4 3200 MHz speed with PC4-25600 bandwidth
  • White aluminium heat spreader for effective cooling
  • CL16-18-18-38 latency for responsive performance
  • XMP 2.0 one-click overclocking via BIOS setting

Capacity and Speed

This Timetec Pinnacle Konduit module delivers 16GB of DDR4 memory at 3200MHz. It is built for desktop users who want a straightforward capacity boost with a white heat spreader. The single 16GB stick leaves additional slots free for future expansion.

Who It Suits

Builders using AMD or Intel DDR4 platforms who can enable XMP 2.0 in the BIOS will reach the rated 3200MHz speed. Without XMP activation the module runs at the standard 2400MHz base frequency. Systems limited to lower DDR4 speeds or laptops requiring SO-DIMM modules cannot use this part.

Latency and Voltage

Tested timings are CL16-18-18-38 at 1.35V for the XMP profile. The 288-pin unbuffered non-ECC design fits standard desktop DIMM slots. Buyers needing ECC error correction or a different latency set should look elsewhere.

特長

  • 16 GB capacity for demanding workloads
  • DDR4 3200 MHz speed with PC4-25600 bandwidth
  • White aluminium heat spreader for effective cooling
  • CL16-18-18-38 latency for responsive performance
  • XMP 2.0 one-click overclocking via BIOS setting

仕様

Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ColorWhite

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 288-pin DDR4 module work with my existing 2400MHz DDR4 sticks?

Yes, it fits the same DDR4 slot, but the system will run all modules at the lowest common speed unless you enable XMP 2.0 in BIOS for the 3200MHz profile.

How do I confirm the kit is running at the advertised 3200MHz CL16 after installation?

Enter the BIOS or use a tool like CPU-Z to verify the memory frequency reads 3200MHz and the timings show 16-18-18-38 or 16-20-20-40 with XMP 2.0 enabled.

Does the single 16GB module ship with any extra cables or a screwdriver for installation?

No, the box contains only the 1x16GB memory module with its white aluminum heat spreader; no cables, tools or additional accessories are included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。