EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Transcend
1GB DDR2 667 desktop memory module rated at PC2 5300 with CL5 timing and 1.80V operation
This Transcend JetRam module provides 1GB of DDR2 memory rated at 667 MHz with CL5 timings. It operates at the standard 1.80V for DDR2 platforms and is 100% tested for compatibility. The stick delivers up to 5.3 GB/s bandwidth for older desktop systems.
This module suits owners of older desktops that require DDR2 667 (PC2 5300) memory to restore function or add capacity. It is not for builders working with modern platforms that use newer memory generations or higher speeds. Systems needing ECC error correction or larger single-stick capacities must look elsewhere.
The memory type and speed rating are the only factors that decide fitment. Only motherboards with DDR2 slots keyed for 667 MHz operation will accept this module. Voltage and timing are fixed at 1.80V and CL5, so no BIOS adjustment is required or possible.
| Brand | Transcend |
|---|---|
| Model | JM667QLJ-1G |
| Capacity | 1GB |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Timing | 5-5-5 |
| Voltage | 1.80V |
| Heat Spreader | No |
| 配送重量 | 0.05 kg |
| 梱包サイズ | 178 × 114 × 19 mm |
The module runs at DDR2 667 (PC2 5300), providing up to 5.3 GB/s of memory bandwidth for desktop workloads.
It fits a standard 240-pin DDR2 DIMM slot and operates at 1.80 V with no heat spreader.
Align the notch with the slot key, press firmly until both retention clips click, then verify the BIOS reports the correct 667 MHz speed.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?