暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small square frameless cooling fan with exposed blades and wire lead

TSUJ

TSUJ Kepler-C72J-OYS-0009 PLA04010B05HH-1 25mm 37mm 5V .27A frameless case fan

SKU CH-ZKGG-J17T0

A 5 V frameless graphics-card cooling fan measuring 25 mm by 37 mm and drawing 0.27 A

  • Featuresoriginal PLA04010B05HH-1 25mm 37mm DC5V 0.27A Frameless grap
  • Frameless design fits tight GPU spaces
  • 5 V DC power draws only 0.27 A
  • 25 mm by 37 mm footprint suits compact builds
  • TSUJ original part ensures direct replacement compatibility

Frameless 5 V graphics-card fan

This 25 mm by 37 mm frameless fan mounts directly on a graphics card cooler and runs from a 5 V DC header. It draws 0.27 A and is intended as a drop-in replacement for the original PLA04010B05HH-1 unit. Builders repairing a Kepler-C72J-OYS-0009 cooler or similar OEM designs can use it without adapters.

Thermals noise and power draw

At 5 V the motor pulls only 0.27 A, so the load on the card’s fan header is minimal. The frameless layout lets airflow pass straight through the heatsink fins with no frame turbulence. In normal operation the fan spins quietly while moving enough air to keep GPU temperatures stable under typical gaming loads.

特長

  • Frameless design fits tight GPU spaces
  • 5 V DC power draws only 0.27 A
  • 25 mm by 37 mm footprint suits compact builds
  • TSUJ original part ensures direct replacement compatibility

仕様

BrandTSUJ
Part NumberKepler-C72J-OYS-0009
Featuresoriginal PLA04010B05HH-1 25mm 37mm DC5V 0.27A Frameless graphics card fan cooling fan

この商品に関する質問

How do I install the 25 mm × 37 mm frameless fan on a Kepler-C72J-OYS-0009 graphics card, and what step is often missed?

Align the frameless housing with the card’s mounting holes, connect the 5 V, 0.27 A lead to the board header, then secure the four screws evenly; the step often missed is checking that the impeller spins freely before final tightening.

What maintenance will the PLA04010B05HH-1 fan need over its life?

Expect to clean dust from the frameless blades every few months with compressed air; if bearing noise appears, replace the entire 5 V, 0.27 A unit as no separate bearing service is possible.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。