暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black mid-tower ATX case with mesh front, tempered glass side door and ARGB lighting

Vetroo

Vetroo AL800 Mid Tower ATX PC Case Black

SKU CH-3WE2-C72RE

A mid-tower ATX case with a hinged tempered-glass door, pre-installed rear ARGB PWM fan, mesh front for high airflow, and room for a 360 mm radiator, 340 mm GPU.

  • 120mm FansRear: 1x 120mm ARGB & PWM & FDB Fan
  • Power Supply MountedBottom
  • ColorBlack
  • TypeA
  • With Power SupplyNo
  • Side Panelwith Side Window

Color Black

  • Syncable ARGB lighting via 5V 3-pin for unified RGB control
  • Hinged 4 mm tempered-glass door opens wide for easy build access
  • Mesh front panel delivers high airflow to keep components cool
  • Fits 360 mm front radiator, eight 120 mm fans and 340 mm GPUs including RTX 50 series
  • Silicone cable grommets plus Type-C, dual USB 3.0 and audio on the I/O panel

Vetroo AL800 mid tower for ATX builds

The Vetroo AL800 is a mid tower case that accepts ATX, micro-ATX and mini-ITX motherboards. It ships with a rear 120 mm ARGB PWM fan using a fluid dynamic bearing. A 5 V 3-pin header on the motherboard synchronises the pre-installed fan and the built-in LED strip. The black finish and tempered glass side window show the interior lighting.

Door opening design simplifies assembly

A hinged 4 mm tempered glass panel swings open like a door, giving wide access to the motherboard tray and drive cages. Two silicone cable grommets route wires behind the tray for cleaner cable management. Builders who prefer a traditional screw-on panel or who need a removable top dust filter will not find those options here.

Cooling and GPU limits set by the chassis

The front panel supports up to a 360 mm radiator and a total of eight 120 mm fans for high airflow. Graphics cards up to 340 mm long fit comfortably, including current RTX 50 series models. CPU coolers taller than 165 mm and power supplies longer than 200 mm cannot be installed.

特長

  • Syncable ARGB lighting via 5V 3-pin for unified RGB control
  • Hinged 4 mm tempered-glass door opens wide for easy build access
  • Mesh front panel delivers high airflow to keep components cool
  • Fits 360 mm front radiator, eight 120 mm fans and 340 mm GPUs including RTX 50 series
  • Silicone cable grommets plus Type-C, dual USB 3.0 and audio on the I/O panel

仕様

120mm FansRear: 1x 120mm ARGB & PWM & FDB Fan
Power Supply MountedBottom
ColorBlack
TypeA
With Power SupplyNo
Side Panelwith Side Window
LEDARGB
BrandVetroo
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays2
Max GPU Length340 mm
Max CPU Cooler Height165 mm
Max PSU Length200 mm

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I confirm the ARGB strip and rear fan are synced with my motherboard after building?

Connect the 5V 3-pin header to the motherboard, then use the board's RGB software to verify the LED strip and rear 120 mm ARGB PWM FDB fan respond together.

What comes in the box and what must I buy separately?

The case includes a pre-installed rear 120 mm ARGB PWM FDB fan, 4 mm tempered glass side panel, ARGB LED strip, two silicone cable grommets and an I/O panel with Type-C, two USB 3.0 ports and audio combo jack; power supply and additional fans are not included.

Which GPU length limit should I check before choosing a graphics card for this case?

The maximum supported GPU length is 340 mm, which also covers RTX 50 series cards; any card longer than that will not fit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。