暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small rectangular M.2 module with gold edge connector and black PCB, about 1.25 by 0.75 inches

Vszerda

Vszerda M.2 A+E Key Gigabit Ethernet network card

SKU CH-YQ9Q-7XY7D

Adds a 1 Gbps wired link to M.2 A+E key slots for compact desktops and thin clients

  • Speed1 gigabits_per_second
  • Interfaceethernet
  • BUSethernet
  • FeaturesDesktop
  • Dimensions1.25 in x 0.75 in x 0.5 in
  • Gigabit wired speed for compact systems via M.2 A+E Key
  • Offloads checksum and segmentation tasks with NDIS 5 and 6 support
  • Handles jumbo frames up to 9K bytes for efficient large transfers
  • Auto-negotiates crossover and corrects pair polarity without manual setup
  • Small 1.25 x .75 x .5 in form factor fits micro and thin devices

Compact M.2 Gigabit NIC for small systems

The Vszerda M.2 A+E Key Gigabit Ethernet network card adds a wired 1000BASE-T connection to devices with a compatible M.2 slot. It is designed for micro, mini and thin computers where internal space is limited. The module measures 1.25 in by 0.75 in by 0.5 in and installs directly onto the board.

Suits builds with an M.2 A+E slot.

This card fits systems that expose an M.2 A+E key interface for networking expansion. Buyers whose device lacks that specific slot, or who need multi-gigabit speeds beyond 1 Gbps, should look at a different solution. The feature set targets IEEE 802.3, 802.3u and 802.3ab compliance with VLAN and jumbo-frame support.

M.2 A+E key interface decides fit

The single specification that determines compatibility is the M.2 A+E key interface. Without that exact slot the module cannot be installed, regardless of other hardware details. The card supports checksum offload, segmentation task-offload and IEEE 802.1Q VLAN tagging through that connection.

特長

  • Gigabit wired speed for compact systems via M.2 A+E Key
  • Offloads checksum and segmentation tasks with NDIS 5 and 6 support
  • Handles jumbo frames up to 9K bytes for efficient large transfers
  • Auto-negotiates crossover and corrects pair polarity without manual setup
  • Small 1.25 x .75 x .5 in form factor fits micro and thin devices

仕様

BrandIO Crest
Speed1 gigabits_per_second
Interfaceethernet
BUSethernet
FeaturesDesktop
Dimensions1.25 in x 0.75 in x 0.5 in

この商品に関する質問

Which M.2 key does this Gigabit Ethernet card use and what form factor fits?

The card uses an M.2 A+E key and measures 1.25 in by 0.75 in by 0.5 in, so it fits small-form-factor systems with that slot.

What real-world throughput can I expect from the 1000BASE-T rating?

The 1 Gbps link supports full-duplex flow control and jumbo frames up to 9K bytes, giving near-wire speeds on a standard Cat5e or better cable.

Does the M.2 interface limit the 1 Gbps Ethernet speed in practice?

The M.2 A+E connection carries the 1000BASE-T signal without bottleneck, and the controller handles IEEE 802.3x flow control and checksum offload at line rate.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。