暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SATA hard drive with circuit board visible

Western Digital

Western Digital WD1002FBYS 1TB 7200RPM 32MB 3.5" SATA internal hard drive

SKU CH-TRP7-B2GA1

A 1 TB desktop hard drive spinning at 7200 RPM with a 32 MB cache and SATA 3Gb/s interface

  • 1 TB capacity for large storage needs
  • 7200 RPM spindle speed for responsive data access
  • 32 MB cache buffer to smooth read and write operations
  • SATA 3 Gb/s interface for broad desktop compatibility
  • Brand-new condition with zero hours of prior use

Enterprise storage drive

The Western Digital RE3 WD1002FBYS is a 1TB 3.5in SATA hard drive built for continuous operation in servers and RAID arrays. Its 7200RPM spindle and 32MB cache suit workloads that demand sustained throughput rather than burst speed.

3Gb/s SATA interface

The drive connects through a standard 3Gb/s SATA port and fits any 3.5in bay with the usual four side screws. Zero-hour status means the mechanism has no prior run time, so installation is straightforward for fresh deployments or array rebuilds.

Thermal and acoustic profile

At 7200RPM the unit produces typical enterprise-level vibration and audible seek noise, which is normal for multi-drive chassis with active airflow. Power draw follows the SATA 3Gb/s specification for 3.5in drives, so no special cabling or cooling beyond standard drive-bay ventilation is required.

特長

  • 1 TB capacity for large storage needs
  • 7200 RPM spindle speed for responsive data access
  • 32 MB cache buffer to smooth read and write operations
  • SATA 3 Gb/s interface for broad desktop compatibility
  • Brand-new condition with zero hours of prior use

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does the SATA 3Gb/s interface limit the WD1002FBYS to 3 Gb/s in practice?

Yes, the drive negotiates at SATA 3 Gb/s, so sustained throughput is capped at that link speed.

What physical space and mounting does the 3.5-inch WD1002FBYS require?

It fits a standard 3.5-inch drive bay and uses the usual four side or bottom screw holes for mounting.

How is the WD1002FBYS installed and what step is often missed?

Connect SATA data and power cables, secure the drive with screws, then initialise and format it in the OS — the formatting step is frequently forgotten.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。