SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Western Digital
A 4 TB internal hard drive with a SAS interface, 7200 RPM spindle speed and 32 MB buffer in a 3.5 inch form factor
This Western Digital RE drive delivers four terabytes of storage on a 6 Gb/s SAS interface. It spins at 7200 RPM with a 32 MB buffer in a standard 3.5 inch form factor. The unit is designed for internal desktop or server installations where SAS connectivity is required.
System builders who need a SAS-attached hard drive for RAID arrays, backup targets or near-line storage will find the interface and capacity appropriate. Buyers whose host bus adapter or backplane only supports a different interface should consider other options.
The drive communicates exclusively over a 6 Gb/s SAS link, so the controller or backplane must provide that exact interface. Without a compatible SAS port the drive cannot be used, making the interface the single specification that decides fit.
| Brand | WD |
|---|---|
| Interface | SAS |
| Capacity | 4TB |
| NAND Flash Memory Type | SLC |
| Form Factor | 3.5" |
The 6 Gb/s SAS link caps the theoretical peak transfer at six gigabits per second; sustained throughput will be lower and depends on the 7200 RPM spindle speed and 32 MB cache.
It fits a standard 3.5-inch drive bay measuring about 4 inches wide by 5.8 inches deep and requires the usual four side or bottom mounting screws.
Mount the drive in the bay, attach both the SAS data cable and the SAS power connector, then ensure the controller BIOS or OS disk utility initialises and formats the 4 TB volume before use.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?