暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver rectangular server PSU with side fan grille and rear connector panel

WMtec

WMtec NPS-250LB 250W server power supply for Dell R210

SKU CH-CN46-JAFV0 MPN NPS-250LB

250 W server power supply compatible with Dell R210 using part numbers NPS-250LB, L250E-S0, PS-4251-1D-LF, C627N and D221N

  • Designed for Dell PowerEdge R210 servers
  • 250 watt output for stable server operation
  • Replaces part numbers NPS-250LB and L250E-S0
  • Compatible with PS-4251-1D-LF and C627N units
  • Matches D221N replacement specifications

Direct replacement for Dell R210

This 250 W server power supply is built to fit the Dell R210 chassis. It carries the NPS-250LB model designation and matches the original part numbers L250E-S0, PS-4251-1D-LF, C627N and D221N. The unit ships new and ready for installation.

Replaces a failed or degraded original unit

When the factory supply shows voltage drift, fan noise or complete loss of output, this module restores the specified 250 W capacity without modification. The swap is worthwhile when uptime requirements exceed the risk of running on ageing hardware.

Limited to Dell R210 compatibility

The mechanical keying, connector pin-out and firmware handshake are specific to the R210 platform. Builders using other server models, workstation chassis or custom enclosures will find the unit physically or electrically incompatible.

特長

  • Designed for Dell PowerEdge R210 servers
  • 250 watt output for stable server operation
  • Replaces part numbers NPS-250LB and L250E-S0
  • Compatible with PS-4251-1D-LF and C627N units
  • Matches D221N replacement specifications

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the NPS-250LB slide into a Dell R210 chassis without an adapter bracket?

The NPS-250LB is built to the Dell R210 form factor and mates directly with the server's power backplane; no extra bracket is required.

Which orientation do I insert the NPS-250LB so the latch clicks on the first try?

Hold the unit with the label facing right, push straight in until the metal tab engages the chassis catch, then press the release lever down to lock it.

How often should I clean the intake vents on the NPS-250LB to keep temperatures stable?

Vacuum the front mesh every three to six months, or sooner in dusty racks, to prevent airflow restriction on the 250 W unit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。