BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
WMtec
Server motherboard supporting Intel Xeon E5 processors and DDR3 memory
This new WMtec server motherboard matches the 100-15IBD, B50-50, CG410, CG510 and NM-A681 part numbers. It is intended for technicians repairing compatible laptop or server platforms that use an Intel Xeon E5 processor. The board ships without a CPU installed.
Installation follows a standard laptop motherboard replacement procedure: disconnect the battery, remove the heatsink, swap the board, then reapply thermal paste and reassemble. Common issues include forgotten cable connectors, mismounted standoffs causing shorts, and using the wrong screw lengths which can crack the PCB.
Before ordering, confirm the original board carries one of the listed model codes such as 100-15IBD or CG510 and that the system uses a supported Intel Xeon E5 processor. The board uses DDR3 memory slots, so existing modules must match that type. Buyers who need a different socket or memory generation should look elsewhere.
| CPU Type | Intel Xeon E5 |
|---|
Boot the system and check the BIOS or operating system CPU identification to verify the 3215U is detected and operating at its rated speed.
The motherboard is supplied as a bare board; you will need to provide a compatible DDR3 memory module, a cooler for the Xeon E5 CPU, and any required power cables.
Select the exact model number printed on your original board — 100-15IBD, B50-50, CG410, CG510 or NM-A681 — to ensure the mounting holes and connector layout match your chassis.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?