暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black M.2 NVME SATA adapter board with USB Type-A plug and thermal pad

WRIARICH

WRIARICH M.2 NVME SATA USB 3.1 Gen2 10Gbps Adapter 2230 2242 2260 2280

SKU CH-BK9K-23XHA

Connects M.2 NVME or SATA SSDs up to 4TB via USB 3.1 Gen2 at 10Gbps, supports 2230 to 2280 sizes with UASP and TRIM

  • ColorBlack
  • Changer TypeSATA
  • SpecificationsM.2 SATA/NVME to USB, USB Type A, 1 amps, 1, 0.02 kilograms,
  • Connector AUSB Type A
  • Connector BUSB Type A
  • Connector PlatingSilicone
  • Supports both NVME and SATA M.2 drives in 2230 2242 2260 2280 sizes
  • USB 3.1 Gen2 delivers up to 10Gbps theoretical speed for NVME protocol
  • RTL9210B controller enables UASP and TRIM for lower CPU overhead
  • Copper rod and silicone pad dissipate heat during extended transfers
  • Includes screws and screwdriver for tool-free drive installation

Dual-protocol M.2 adapter

This WRIARICH adapter connects M.2 NVME and NGFF SATA drives in 2230 2242 2260 2280 sizes to a USB 3.1 Gen2 Type-A port. It accepts B-key M-key and B+M-key modules up to 4 TB capacity and uses the RTL9210B controller with UASP and TRIM support. A heat-dissipating silicone pad and mounting screws are included.

Suits laptop owners swapping drives

Ideal for technicians and enthusiasts who need to read or clone both NVME and SATA M.2 drives without carrying two separate adapters. The USB 3.1 Gen2 interface delivers 10 Gbps theoretical bandwidth for NVME and 5 Gbps for SATA protocols. Not for users who require PCI-E AHCI protocol support or a USB Type-C host connection.

Protocol support is the deciding factor

This unit handles NVME and SATA drives simultaneously but does not support PCI-E AHCI drives. Verify that the target drive uses NVME or NGFF SATA signalling before purchase. The adapter is backward compatible with USB 3.0 and USB 2.0 hosts and works with Windows 11 10 7 Mac OS and Linux.

特長

  • Supports both NVME and SATA M.2 drives in 2230 2242 2260 2280 sizes
  • USB 3.1 Gen2 delivers up to 10Gbps theoretical speed for NVME protocol
  • RTL9210B controller enables UASP and TRIM for lower CPU overhead
  • Copper rod and silicone pad dissipate heat during extended transfers
  • Includes screws and screwdriver for tool-free drive installation

仕様

BrandSoNNeT
SeriesM.2 SATA/NVME to USB
ModelM.2 SATA/NVME to USB
ColorBlack
Changer TypeSATA
SpecificationsM.2 SATA/NVME to USB, USB Type A, 1 amps, 1, 0.02 kilograms, Silicone, ELUTENG, Laptop
Connector AUSB Type A
Connector BUSB Type A
Connector PlatingSilicone
Connector StyleStandard
FeaturesUSB Type A, Silicone, 1 amps, Laptop, 1, ELUTENG, M.2 SATA/NVME to USB
Weight0.02 kilograms
Package Quantity1

この商品に関する質問

What comes with the WRIARICH M.2 adapter and do I need to buy anything else?

The package includes the adapter board, a USB Type-A cable, mounting screws and a screwdriver. A thermal silicone pad is also supplied. You only need to provide a compatible M.2 NVME or SATA SSD in 2230, 2242, 2260 or 2280 size.

Which M.2 lengths and key types does this adapter accept?

It fits 2230, 2242, 2260 and 2280 modules with B-key, M-key or B+M-key notches. Both NVME and NGFF (SATA) protocols are supported, but PCI-E AHCI drives will not work.

What real-world speed can I expect from the 10 Gbps USB 3.1 Gen2 connection?

The RTL9210B controller delivers up to 1000 MB/s sequential reads with an NVME drive; SATA drives are limited to the 5 Gbps NGFF ceiling. Actual throughput depends on the SSD used and the host USB port.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。