暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black circuit board with silver heatsink and gold PCIe edge connector

WRIARICH

WRIARICH NVME PCIe 4.0 Adapter with Heat Sink x16

SKU CH-HSVZ-QZRGM

Adds an M.2 NVMe SSD to a PCIe x16 slot with a heatsink for 2230, 2242, 2260 and 2280 drives

  • ColorBlack
  • Changer TypeSATA
  • SpecificationsUS-M.2+heatsink cooler-1, PCIe, 1, 0.110231131 pounds, EZDIY
  • Connector APCIe
  • Connector BPCIe
  • Connector StyleStandard
  • Add NVMe storage without an onboard M.2 slot
  • Fits 2230 2242 2260 2280 drives in a PCIe x16 slot
  • Included heat sink and thermal pad sustain peak speeds
  • Works with PCIe 4.0 3.0 2.0 drives no driver needed
  • Key M NVMe only not compatible with Key B SATA SSDs

M.2 NVMe adapter for x16 slot

This WRIARICH adapter lets you install an M.2 NVMe SSD into a PCI Express x16 slot when your motherboard lacks an M.2 socket. It accepts 2230, 2242, 2260 and 2280 form-factor drives and includes a heatsink with a thermal pad to help sustain performance. The card supports PCIe 4.0 and backward-compatible generations, and works with Windows XP through Windows 10 without extra drivers.

Suits builders without an M.2 slot.

The board is intended for users who want to add NVMe storage to a system that only offers PCIe expansion slots. It only accepts Key M NVMe modules, so buyers with Key B or Key B+M SATA M.2 drives must look elsewhere. It also requires a motherboard CSM option if you plan to boot from the installed SSD, otherwise the drive will not be recognised at startup.

Check slot wiring and CSM support before ordering

Verify that your PCIe x16 slot is electrically wired for at least x4 operation, because the adapter cannot function in a slot limited to x1. Confirm the motherboard firmware provides a CSM or legacy boot setting if you intend to use the NVMe drive as a boot device. The package weighs .110231131 pounds and contains the adapter, heatsink and thermal pad only.

特長

  • Add NVMe storage without an onboard M.2 slot
  • Fits 2230 2242 2260 2280 drives in a PCIe x16 slot
  • Included heat sink and thermal pad sustain peak speeds
  • Works with PCIe 4.0 3.0 2.0 drives no driver needed
  • Key M NVMe only not compatible with Key B SATA SSDs

仕様

BrandSoNNeT
SeriesUS-M.2+heatsink cooler-1
ModelUS-M.2+heatsink cooler-1
Part NumberUS-M.2+heatsink cooler-1
ColorBlack
Changer TypeSATA
SpecificationsUS-M.2+heatsink cooler-1, PCIe, 1, 0.110231131 pounds, EZDIY-FAB, PC
Connector APCIe
Connector BPCIe
Connector StyleStandard
FeaturesPCIe, PC, 1, EZDIY-FAB, US-M.2+heatsink cooler-1
Weight0.110231131 pounds
Package Quantity1

この商品に関する質問

Do I need a free PCIe x16 slot on my motherboard to install this adapter?

Yes, the adapter only fits a PCIe x16 slot and accepts M.2 NVME SSDs in 2230, 2242, 2260 and 2280 sizes.

Will this adapter run at PCIe 4.0 speeds if my motherboard only supports PCIe 3.0?

The adapter supports PCIe Gen4 and Gen3, so it will operate at Gen3 speeds on a Gen3 motherboard while remaining compatible with Gen4 NVME SSDs.

How can I verify the SSD is detected and running after I fit the adapter and heat sink?

Enter the motherboard BIOS and confirm the NVME drive appears in the storage list, then check Device Manager in Windows to ensure the drive is recognised without extra drivers.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。