YESTON
YESTON YT-120 Sakura 120mm ARGB Case Fan 3-Pack
Three 120 mm ARGB fans deliver up to 79 CFM airflow at 35–40 dBA with PWM speeds of 800–1800 RPM
- TypeCase Fan
- CompatibilityCase
- Fan Size120mm
- Air Flow79CFM(MAX)
- Noise Level35 - 40 dBA
- Power Connector4 Pin
Model Forward Fan
- Forward Fan
- Reverse Fan
- High airflow of 79 CFM keeps components cool
- Quiet operation between 35 and 40 dBA
- PWM control from 800 to 1800 RPM
- Addressable RGB lighting with 5 V power
- Standard 120 mm size fits most cases
Quiet 120mm ARGB fan triple pack
These three 120mm fans deliver up to 79CFM of airflow while operating between 35 and 40 dBA. Each unit uses a 4-pin PWM connector for speed control from 800 to 1800 RPM. Addressable RGB lighting runs on a separate 5V supply.
Builders who value low noise and colour sync
The quiet edition suits systems where acoustic comfort matters more than maximum static pressure. Users needing higher pressure for dense radiator stacks or very restrictive mesh should consider alternative models.
Handles typical case and radiator cooling
At 79CFM the trio comfortably feeds mid-tower chassis and standard 120mm radiators. Demanding multi-radiator loops or heavily filtered enclosures may exceed the available pressure headroom.
特長
- High airflow of 79 CFM keeps components cool
- Quiet operation between 35 and 40 dBA
- PWM control from 800 to 1800 RPM
- Addressable RGB lighting with 5 V power
- Standard 120 mm size fits most cases
仕様
| Brand | Yeston |
|---|---|
| Series | Air Series |
| Model | YT-120 Sakura |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Air Flow | 79CFM(MAX) |
| Noise Level | 35 - 40 dBA |
| Power Connector | 4 Pin |
| Color | Blue / White |
| LED | RGB |
このモデルの他のバージョン
同シリーズにさらに 5点
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
YESTON YT-120 Sakura 120mm ARGB Case Fan Quiet Edition Reverse Fan 1 Pack
- Case Fan
- Case
YESTON YT-120 Sakura 120mm ARGB Case Fan (Blue/White) 6 Pack
- Case Fan
- Case
この商品に関する質問
Does my motherboard need both a 4-pin PWM header and a separate 5 V 3-pin ARGB header to run the YT-120 Sakura fans?
Yes. Each fan draws 12 V through the 4-pin PWM connector for speed control and 5 V through a 3-pin ARGB connector for lighting.
Will the 1800 RPM top speed overwhelm an older CPU cooler designed for lower-pressure 120 mm fans?
The PWM range lets the fan idle at 800 RPM and scale to 1800 RPM only when the motherboard requests it, so the cooler sees the airflow it expects.
How can I confirm the three fans are spinning and lighting correctly after installation?
In BIOS or fan-control software verify each header reports 800–1800 RPM under load, and check that the ARGB software shows all three fans responding to colour changes.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear








