BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
YINGHUA
Dual-socket LGA2011-3 server board with X99 chipset, eight DDR4 slots, eight SATA 2.0 ports, two M.2 NVME slots, three PCIe x16 slots, dual 100Mbps LAN, and bundled 2×4GB 2666MHz RAM plus SATA cable
The YINGHUA X99 motherboard supports two LGA2011-3 processors and ships with two 4 GB DDR4 2666 modules and a SATA cable. It targets system builders assembling multi-threaded servers or workstations on a budget. The E-ATX form factor fits standard server chassis designed for dual-CPU layouts.
An 8-layer PCB and 12-phase power delivery feed dual 8-pin plus 24-pin connectors for stable current under load. Eight SATA 2.0 ports and two M.2 NVME slots handle storage arrays, while three PCI Express x16 and two x1 slots provide room for add-in cards. Dual 100 Mbps network ports offer basic connectivity out of the box.
Four-channel architecture accepts DDR4 at 2133, 2400 or 2800 MHz up to 256 GB total using 32 GB modules. ECC and non-ECC desktop memory are both supported. Buyers needing more than eight DIMM slots or faster native memory speeds should look elsewhere.
| CPU Type | Intel Atom |
|---|
The board provides eight SATA 2.0 ports, limiting each drive to the 2.0 interface speed.
An E-ATX compatible chassis with at least 33 cm depth and 31 cm width is needed to mount this board.
Populate one module per channel across the eight DDR4 slots following the manual’s four-channel population sequence; skipping the correct slot order reduces bandwidth.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?