BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
ZOTAC
Refurbished GeForce RTX 3060 Ti with 4864 CUDA cores, 8GB 256-bit GDDR6 at 14 Gbps, boost clock 1695 MHz, IceStorm 2.0 cooling with Freeze Fan Stop, HDMI 2.1 plus three DisplayPort 1.4a outputs, 200
The ZOTAC GeForce RTX 3060 Ti Twin Edge OC LHR is a graphics card built on the NVIDIA Ampere architecture with 4864 CUDA cores and 8GB of GDDR6 memory on a 256-bit interface. It targets gamers and creators who want solid 1440p performance and support for modern APIs such as DirectX 12 Ultimate and Vulkan RT. The card includes an 8-pin power connector and requires a 650W power supply for stable operation.
Under continuous load the IceStorm 2.0 cooler uses two fans governed by Active Fan Control to manage the 200W thermal design power. The FREEZE Fan Stop feature keeps the fans idle during light workloads and spins them up only when the GPU temperature demands it. A metal wraparound backplate adds structural rigidity and helps dissipate heat across the 222 mm length of the card.
The card fits a standard ATX form factor and connects via a PCI Express 4.0 slot with a single 8-pin power cable. Builders should verify that their case can accommodate the 222 mm length and that the power supply provides the recommended 650W. Driver support begins with Windows 10 64-bit build 2004 or later, and the FireStorm utility offers additional tuning options after installation.
| Brand | ZOTAC |
|---|---|
| Series | Twin Edge OC LHR |
| Model | ZT-A30610H-10MLHR |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3060 Ti |
| Boost Clock | 1695 MHz |
| CUDA Cores | 4864 |
| Effective Memory Clock | 14 Gbps |
| Memory Size | 8GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1 |
| DisplayPort | 3 x DisplayPort 1.4a |
| Max Resolution | 7680 x 4320 |
| SLI Support | No |
| Virtual Reality Ready | Yes |
| Cooler | Double Fans |
| Operating Systems Supported | Windows 10 64-bit (build 2004 or later) 👉Check gaming pc with Windows 11 Pro |
| Thermal Design Power | 200W |
| Recommended PSU Wattage | 650W |
| Power Connector | 8-Pin |
| HDCP Ready | 2.3 |
| Features | 2nd Gen Ray Tracing Cores 3rd Gen Tensor Cores White LED Lighting IceStorm 2.0 Advanced Cooling Active Fan Control with FREEZE Fan Stop Metal Wraparound Backplate FireStorm Utility VR Ready LHR 25 MH/s ETH hash rate (est.) |
| Form Factor | ATX |
| Max GPU Length | 222 mm |
| Card Dimensions (L x H) | 8.74" x 4.55" |
| Slot Width | 2 Slots |
| 配送重量 | 1.13 kg |
| 梱包サイズ | 286 × 229 × 89 mm |
The IceStorm 2.0 cooler uses two fans with Active Fan Control and a FREEZE Fan Stop mode that halts the fans at low load, while a metal wraparound backplate helps spread heat from the 200 W TDP GPU.
ZOTAC recommends a 650 W PSU with one 8-pin PCIe connector and an ATX case that can fit a 222 mm long graphics card.
Yes, the four simultaneous outputs support up to 7680 x 4320 resolution and are backward compatible with lower-resolution displays.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?