暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 120mm square case fan 38mm thick with four-pin connector

Zyvpee

Zyvpee 12038 DC48V 0.7A 2B12038B48H P079 4 Pin case fan

SKU CH-ZVGP-KEB63

120 mm case fan with dual-ball bearing, 48 V DC power and four-wire PWM control in a 38 mm thick black frame

  • TypeCase Fan
  • Bearing Type2 Ball
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesPower Cooling
  • 120 mm frame fits standard chassis slots
  • 38 mm thickness moves more air per revolution
  • Dual-ball bearings extend operational lifespan
  • 48 V 0.7 A rating supports industrial power rails
  • Four-wire connector enables PWM speed control

120 mm 12038 48 V DC fan

This 120 mm case fan runs on 48 V DC at .7 A and fits a 120 by 38 mm mounting pattern. It is built for servers, workstations or industrial enclosures that already supply a 48 V rail.

Dual ball bearing 4 pin PWM

Two ball bearings give a long service life at continuous duty, while the four wire connector supports PWM speed control and tachometer feedback for precise airflow management.

Non LED black frame

The plain black frame has no lighting, so it suits rack cabinets or windowless chassis where visual distraction is unwanted. The 48 V requirement means it cannot be used on standard 12 V motherboard headers without a separate voltage source.

特長

  • 120 mm frame fits standard chassis slots
  • 38 mm thickness moves more air per revolution
  • Dual-ball bearings extend operational lifespan
  • 48 V 0.7 A rating supports industrial power rails
  • Four-wire connector enables PWM speed control

仕様

Brand3ccooler.com
Series2B12038B48H
Model2B12038B48H
TypeCase Fan
Bearing Type2 Ball
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesPower Cooling
Dimensions120*38mm

この商品に関する質問

Will the 4 Pin connector on the 12038 fan plug directly into a standard motherboard PWM header?

Yes, the 4 Pin connector follows the standard PWM pinout so it fits a typical motherboard fan header without an adapter.

How can I verify the 2 Ball bearing fan is spinning at the correct speed after installation?

Monitor the RPM reading in BIOS or fan-control software; a steady value that changes with PWM duty cycle shows the 48V 0.7A unit is operating normally.

Does the box include mounting screws for the 120*38mm frame or do I need to supply my own?

The package contains only the fan itself; mounting screws for the 120mm by 38mm frame must be purchased separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。